DataSheet.es    


PDF AH183 Data sheet ( Hoja de datos )

Número de pieza AH183
Descripción (AH182 / AH183) LOW POWER HALL EFFECT SWITCH
Fabricantes Diodes Incorporated 
Logotipo Diodes Incorporated Logotipo



Hay una vista previa y un enlace de descarga de AH183 (archivo pdf) en la parte inferior de esta página.


Total 10 Páginas

No Preview Available ! AH183 Hoja de datos, Descripción, Manual

AH182/AH183
LOW POWER HALL EFFECT SWITCH
Features
Micropower operation
2.5V to 5.5V battery operation
Offset Canceling Technology
Superior temperature stability
Extremely Low Switch-Point Drift
Insensitive to Physical Stress
-40°C to 85°C operating temperature
Lead Free packages: SIP-3L and SC59 (Commonly
known as SOT23 in Asia)
SIP-3L and SC59: Available in “Green” Molding
Compound (No Br, Sb)
Lead Free Finish / RoHS Compliant (Note 1)
General Description
AH182/AH183 is a three-terminal Hall effect sensor device with
an output driver, mainly designed for battery–operation,
hand-held equipment (such as cellular and cordless phones, and
PDA’s) The total operation power is down to 15uW in the
2.75V supply.
The south pole of sufficient strength will turn the output on in
SIP-3L but the north pole of sufficient strength will turn the output
on in SC59 package. The output will be turned off under no
magnetic field.
While the magnetic flux density (B) is larger than operation point
(Bop), the output will be turned on (low), the output is held until
B is lower than the release point (Brp), then turned off. The
difference between AH182 and AH183 is that the former
consumes less power than that of the latter in the Hall sensor
operation.
Applications
Cover detector
Speed measurement
Home safety
Typical Circuit *
2.5~5.5V
C
AH182/AH183
RL
Output
Gnd
* C is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 10nF~100nF.
RL is the pull-up resistor, the recommended resistance is 10Kohm~100Kohm.
AH182/AH183 Rev. 8
DS31024
1 of 10
www.diodes.com
NOVEMBER 2009
© Diodes Incorporated

1 page




AH183 pdf
AH182/AH183
LOW POWER HALL EFFECT SWITCH
Magnetic Characteristics (TA = 25°C, Vdd = 3V, Note 5)
Symbol
Bops(south pole to brand side)
Brps(south pole to brand side)
Bhy( Bopx Brpx )
Parameter
Operation Point
Release Point
Hysteresis
(1mT = 10 Gauss)
Min
Typ.
Max
Unit
- 40 60
10 30 - Gauss
- 10 -
Notes: 5. Magnetic characteristics are for design information, which will vary with supply voltage, operating temperature and after soldering.
Output
S
Marking side
N
(SC59)
S
Marking side
N
(SIP-3L)
( off-state )
Vdd
Turn off
Bhy
Turn on
Vsat
0
B rp
( on-state )
B op
( Magnetic flux density B )
AH182/AH183 Rev. 8
DS31024
5 of 10
www.diodes.com
NOVEMBER 2009
© Diodes Incorporated

5 Page










PáginasTotal 10 Páginas
PDF Descargar[ Datasheet AH183.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
AH180MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCHDiodes Incorporated
Diodes Incorporated
AH1801ULTRA-SENSITIVE HALL EFFECT SWITCHDiodes
Diodes
AH1802ULTRA-SENSITIVE OMNIPOLAR HALL-EFFECT SENSOR SWITCHDiodes
Diodes
AH1803ULTRA-SENSITIVE HALL EFFECT SWITCHDiodes
Diodes

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar