|
|
Número de pieza | WM8786 | |
Descripción | Stereo ADC | |
Fabricantes | Wolfson Microelectronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de WM8786 (archivo pdf) en la parte inferior de esta página. Total 24 Páginas | ||
No Preview Available ! w
24-Bit, 192kHz Stereo ADC
WM8786
DESCRIPTION
FEATURES
The WM8786 is a stereo audio ADC with differential inputs
designed for high performance recordable media applications.
Data is provided as a PCM output.
Stereo 24-bit multi-bit sigma-delta ADCs are used with digital
audio output word lengths of 16 to 32 bits, and sampling rates
from 8kHz to 192kHz. The device also has a high pass filter to
remove residual DC offsets.
The device is hardware controlled. Pin programming provides
access to all features including oversampling rate, audio format,
powerdown, master/slave control and digital signal
manipulation. The device is supplied in a 20-lead SSOP
package.
• SNR 111dB (‘A’ weighted @ 48kHz)
• THD -102dB (at -0.1dB)
• Sampling Frequency: 8 – 192kHz
• Hardware Control Interface
• Master or Slave Clocking Mode
• Programmable Audio Data Interface Modes
- I2S, Left, Right Justified or DSP
- 24-Bit Word Length
• Supply Voltages
- Analogue 4.5 to 5.5V
- Digital core: 2.7V to 3.6V
• 20-lead SSOP package
APPLICATIONS
• Recordable DVD Players
• Personal Video Recorders
• High End Sound Cards
• Studio Audio Processing Equipment
BLOCK DIAGRAM
www.DataSheet4U.com
WOLFSON MICROELECTRONICS plc
To receive regular email updates, sign up at http://www.wolfsonmicro.com/enews/
Production Data, February 2007, Rev 4.2
Copyright 2007 Wolfson Microelectronics plc
1 page Production Data
WM8786
ABSOLUTE MAXIMUM RATINGS
Absolute Maximum Ratings are stress ratings only. Permanent damage to the device may be caused by continuously
operating at or beyond these limits. Device functional operating limits and guaranteed performance specifications are given
under Electrical Characteristics at the test conditions specified.
ESD Sensitive Device. This device is manufactured on a CMOS process. It is therefore generically
susceptible to damage from excessive static voltages. Proper ESD precautions must be taken during handling
and storage of this device.
Wolfson tests its package types according to IPC/JEDEC J-STD-020B for Moisture Sensitivity to determine acceptable storage
conditions prior to surface mount assembly. These levels are:
MSL1 = unlimited floor life at <30°C / 85% Relative Humidity. Not normally stored in moisture barrier bag.
MSL2 = out of bag storage for 1 year at <30°C / 60% Relative Humidity. Supplied in moisture barrier bag.
MSL3 = out of bag storage for 168 hours at <30°C / 60% Relative Humidity. Supplied in moisture barrier bag.
The Moisture Sensitivity Level for each package type is specified in Ordering Information.
CONDITION
Digital supply voltage
Analogue supply voltage
Voltage range digital inputs
Voltage range analogue inputs
Master Clock Frequency
Operating temperature range, TA
Storage temperature after soldering
Notes
1. Analogue and digital grounds must always be within 0.3V of each other.
MIN
-0.3V
-0.3V
DGND -0.3V
AGND -0.3V
-25°C
-65°C
MAX
+3.63V
+7V
DVDD + 0.3V
AVDD +0.3V
40MHz
+85°C
+150°C
RECOMMENDED OPERATING CONDITIONS
PARAMETER
Digital supply range
Analogue supply range
Ground
SYMBOL
DVDD
AVDD
DGND,AGND
TEST
CONDITIONS
MIN
TYP
MAX
UNIT
2.7 3.6 V
4.5 5.5 V
0V
w
PD Rev 4.2 February 2007
5
5 Page Production Data
DIGITAL FILTER CHARACTERISTICS
The WM8786 digital filter characteristics scale with sample rate.
WM8786
PARAMETER
TEST CONDITIONS
ADC Sample Rate (Single Rate - 48Hz typically)
Passband
+/- 0.005dB
-6dB
Passband Ripple
Stopband
Stopband Attenuation
f > 0.546fs
Group Delay
ADC Sample Rate (Dual Rate - 96kHz typically)
Passband
+/- 0.005dB
-6dB
Passband Ripple
Stopband
Stopband Attenuation
f > 0.546fs
Group Delay
ADC Sample Rate (Quad Rate - 192kHz typically)
Passband
+/- 0.005dB
-3dB
-6dB
Passband Ripple
Stopband
Stopband Attenuation
f > 0.75fs
Group Delay
ADC High Pass Filter
Corner Frequency
-3dB
-0.5dB
-0.1dB
Table 1 Digital Filter Characteristics
MIN
0
0.546fs
-85
0
0.546fs
-85
0
0.75fs
-85
TYP
0.5fs
32/fs
0.5fs
32/fs
0.45fs
0.5fs
10/fs
3.7
10.4
21.6
MAX
UNIT
0.454fs
+/- 0.005
dB
dB
s
0.454fs
+/- 0.005
dB
dB
s
0.25fs
+/- 0.005
dB
dB
s
Hz
TERMINOLOGY
1. Stop Band Attenuation (dB) - the degree to which the frequency spectrum is attenuated (outside audio band)
2. Pass-band Ripple – any variation of the frequency response in the pass-band region
HIGH PASS FILTER TRANSFER CHARACTERISTIC
The high pass filter response is defined by the following polynomial:
H(z)
=
1
-
1- z-1
(1-α )z
-1
where α = 2-11 for single rate (48k) mode
α = 2-12 for dual rate (96k) mode
α = 2-13 for quad rate (192k) mode
w
PD Rev 4.2 February 2007
11
11 Page |
Páginas | Total 24 Páginas | |
PDF Descargar | [ Datasheet WM8786.PDF ] |
Número de pieza | Descripción | Fabricantes |
WM8781 | Stereo ADC | Wolfson Microelectronics |
WM8782 | Stereo ADC | Wolfson Microelectronics |
WM8782A | Stereo ADC | Wolfson Microelectronics |
WM8785 | Stereo ADC | Wolfson Microelectronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |