DataSheet.es    


PDF PD050VX2 Data sheet ( Hoja de datos )

Número de pieza PD050VX2
Descripción TECHNICAL SPECIFICATION
Fabricantes AZ Displays 
Logotipo AZ Displays Logotipo



Hay una vista previa y un enlace de descarga de PD050VX2 (archivo pdf) en la parte inferior de esta página.


Total 27 Páginas

No Preview Available ! PD050VX2 Hoja de datos, Descripción, Manual

Version : 1.0
PD050VX2
TECHNICAL SPECIFICATION
MODEL NO. : PD050VX2
Customer’s Confirmation
Customer
Date
By
PVI’s Confirmation
www.DataSheet4U.com
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd. Page:1

1 page




PD050VX2 pdf
Outline Drawing : Rear View (unit mm)
PD050VX2
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd. Page:5

5 Page





PD050VX2 arduino
PD050VX2
7-2) Recommended Driving Condition for Back Light
Ta=25
Parameter
Symbol Min. Typ. Max.
Lamp Voltage
Lamp Current
VL 390 410 430
IL 4.0 6.0 8.0
Lamp Frequency
Starting Voltage (25 )
(Reference Value)
PL
Vs
30 45 60
- - 640
Starting Voltage (0 )
(Reference Value)
Vs
-
- 740
Unit
V
mA
KHz
Vrms
Vrms
Remark
IL=6mA
Note 7-1
Note 7-2
Note 7-3
Note 7-3
Note 7-1: In order to satisfy the quality of B/L, no matter use what kind of inverter, the output
lamp current must between Min. and Max. to avoid the abnormal display image
caused by B/L.
Note 7-2: The waveform of lamp driving voltage should be as closed to a perfect sine wave as
possible.
Note 7-3: The” Max of starting voltage ” means the minimum voltage of inverter to turn on the
CCFL. and it should be applied to the lamp for more than 1 second to start up.
Otherwise the lamp may not be turned on.
7-3) Power Consumption
Parameter
Supply Current for Gate Driver (Hi level)
Supply Current for Gate Driver (Low level)
Supply Current for Source Driver (Digital)
Supply Current for Source Driver (Analog)
Supply Current for Gate Driver (Digital)
LCD Panel Power Consumption
Back Light Lamp Power Consumption
Symbol
IGG
IEE
IDD1
IDD2
ICC
Condition
VGG=+19V
VEE=-10V
VDD1=+3.3V
VDD2=+9.5V
VCC=+3.3V
-
-
Typ.
0.162
0.22
11.26
16.2
0.0153
196.31
2.46
Max. Unit Remark
0.202 mA
0.27 mA
14.07 mA
22.5 mA
0.0192 mA
266.75 mW Note 7-4
- W Note 7-5
Note 7-4: The power consumption for back light is not included.
Note 7-5: Back light lamp power consumption is calculated by IL VL.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd. Page:11

11 Page







PáginasTotal 27 Páginas
PDF Descargar[ Datasheet PD050VX2.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
PD050VX2TECHNICAL SPECIFICATIONAZ Displays
AZ Displays
PD050VX4Display ModulePrime View
Prime View
PD050VX6Display ModulePrime View
Prime View
PD050VXBDisplay ModulePrime View
Prime View

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar