|
|
PDF RGE400 Data sheet ( Hoja de datos )
| Número de pieza | RGE400 | |
| Descripción | (RGE Series) Selection Guide and Product Data | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de RGE400 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
RGE Selection Guide
and Product Data
This section has two parts:
• A Selection Guide that walks you through the process of
selecting the correct RGE device for a circuit.
• Product Data that outlines electrical characteristics,
physical characteristics, agency recognitions, environmental
specifications, component layouts, tape and reel specifications,
and ordering information for RGE devices.
RGE Selection Guide
Follow these seven steps to select a PolySwitch RGE device for
a circuit:
1. Define the operating parameters for the circuit.
These include:
• Maximum ambient operating temperature
• Normal operating current
• Maximum operating voltage (RGE is 16 V maximum)
• Maximum interrupt current
2. Select the RGE device that accommodates the circuit’s maximum
ambient operating temperature and normal operating current.
3. Compare the RGE device’s maximum operating voltage and maxi-
mum interrupt current with the circuit’s to be sure the circuit does
not exceed the device ratings.
4. Check the RGE device’s time-to-trip be to sure it will protect the
circuit.
5. Verify that the circuit’s ambient operating temperatures are within
the RGE device’s operating temperature range.
6. Verify that the RGE device’s dimensions fit the application’s space
considerations.
7. Independently evaluate and test the suitability and performance
of the RGE device in the application.
4
®
®
TUV Rheinland
Raychem Circuit Protection Devices
RGE Devices 129
1 page  
5. Verify ambient operating conditions.
RGE
Radial Leaded
Ensure that your application’s minimum and maximum ambient
temperatures are within the operating temperature range of –40°C
and 85°C.
Maximum device surface temperature in the tripped state is 125°C.
6. Verify the RGE device’s dimensions.
Using dimensions from the table below, compare the dimensions of the
RGE device you selected with the application’s space considerations.
Product dimensions (millimeters/inches)
Part
number
RGE300
New RGE400
RGE500
New RGE600
RGE700
New RGE800
RGE900
New RGE1000
RGE1100
New RGE1200
New RGE1400
A
max.
7.1 (0.28)
8.9 (0.35)
10.4 (0.41)
10.7 (0.42)
11.2 (0.44)
12.7 (0.50)
14.0 (0.55)
16.5 (0.65)
17.5 (0.69)
17.5 (0.69)
27.9 (1.10)
B
max.
11.0 (0.43)
12.8 (0.50)
14.3 (0.56)
17.1 (0.67)
19.7 (0.78)
20.9 (0.82)
21.7 (0.85)
24.1 (0.95)
26.0 (1.02)
28.0 (1.10)
27.9 (1.10)
C
typ.
5.1 (0.20)
5.1 (0.20)
5.1 (0.20)
5.1 (0.20)
5.1 (0.20)
5.1 (0.20)
5.1 (0.20)
5.2 (0.20)
5.1 (0.20)
10.2 (0.40)
10.2 (0.40)
* Kinked leads are
available for
RGE300 - RGE1400
Lead Size
RGE300–RGE1100
∅ 0.81
(0.032)
20 AWG
RGE1200–RGE1400
∅ 1.0
(0.040)
18 AWG
D
min.
7.6 (0.30)
7.6 (0.30)
7.6 (0.30)
7.6 (0.30)
7.6 (0.30)
7.6 (0.30)
7.6 (0.30)
7.6 (0.30)
7.6 (0.30)
7.6 (0.30)
7.6 (0.30)
E
max.
3.0 (0.12)
3.0 (0.12)
3.0 (0.12)
3.0 (0.12)
3.0 (0.12)
3.0 (0.12)
3.0 (0.12)
3.0 (0.12)
3.0 (0.12)
3.6 (0.14)
3.4 (0.13)
RGE300–RGE1400*
A
F
typ.
1.2 (0.05)
1.2 (0.05)
1.2 (0.05)
1.2 (0.05)
1.2 (0.05)
1.2 (0.05)
1.2 (0.05)
1.2 (0.05)
1.2 (0.05)
1.4 (0.06)
1.4 (0.06)
E
Marking
B
D
C
CL CL
CL CL
F
4
Raychem Circuit Protection Devices
RGE Devices 133
5 Page 
Part marking system
V 16
G500
MN8F
Example
RGE
Radial Leaded
V - 16
G
Voltage rating
Raychem symbol
Part ID
Product family (RGE)
Lot number/Date code (may be on the back)
Part
description
RGE300
New RGE400
RGE500
New RGE600
RGE700
New RGE800
RGE900
New RGE1000
RGE1100
New RGE1200
New RGE1400
Part
ID
300
400
500
600
700
800
900
1000
1100
1200
1400
4
WARNING:
• Operation beyond maximum ratings or improper use may result
in device damage and possible electrical arcing and flame.
• These devices are intended for protection against occasional over-
current or overtemperature fault conditions, and should not be used
when repeated fault conditions are anticipated.
• Operation in circuits with inductive spikes can generate voltages
above the rated voltage of the devices and should be evaluated
for suitability.
Raychem Circuit Protection Devices
RGE Devices 139
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet RGE400.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| RGE400 | (RGE Series) Selection Guide and Product Data | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |