DataSheet.es    


PDF GP2S60 Data sheet ( Hoja de datos )

Número de pieza GP2S60
Descripción Subminiature / Reflective Type Photointerrupter
Fabricantes Sharp Electrionic 
Logotipo Sharp Electrionic Logotipo



Hay una vista previa y un enlace de descarga de GP2S60 (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! GP2S60 Hoja de datos, Descripción, Manual

www.DataSheet4U.com
GP2S60
GP2S60
I Features
1. Subminiature, leadless type. (Dimensions : 3.2×1.7×1.1mm)
2. Soldering reflow.
(Peak temperature : 240˚C, 10s or less)
3. Taped model. (2 000 pcs/reel)
4. Visible light cut-off type.
I Applications
1. Audio equipment
2. VCR
3. Camcoders
4. Printers
5. CD-ROM drives
I Absolute Maximum Ratings
(Ta=25˚C)
Parameter
Symbol Rating
Unit
Forward current
IF 50 mA
Reverse voltage
VR 6 V
Power dissipation PD 75 mW
Collector-emitter voltage VCEO
35
V
Emitter-collector voltage VECO
6
V
Collector current
IC 20 mA
Collector power dissipation PC
75 mW
Total power dissipation Ptot
100 mW
Operating temperature Topr 25 to +85 ˚C
Storage temperature
Tstg 40 to +100 ˚C
* Soldering temperature Tsol 260 ˚C
*For MAX. 5s
Subminiature, Reflective Type
Photointerrupter for Automatic
Mounting
I Outline Dimensions
(0.7) Detector center
(Unit : mm)
(0.7)
Emitter center
2.7
3.2
(1.8)
Internal connection diagram
21
34
34
2 1 1 Anode
2 Collector
3 Emitter
Plating area
4 Cathode
Unspecified tolerance : ±0.15mm
( ) : Reference dimensions
Recommended pattern
21 21.7 21
Pattern wiring is not allowed on
short-circuit.
Tolerance : ±0.1mm
portion not to cause
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://sharp-world.com/ecg/

1 page




GP2S60 pdf
Fig.13 Relative Collector Current vs.OMS
Card Moving Distance
100 OMS test card
d
1mm
80 Sensor + 0
VCE=2V
IF=4mA
60 d=1mm
40
20
3 2 1 0 1 2 3 4 5 6
OMS card moving distance (mm)
Fig.15 Reflow Soldering
Only one time soldering is available within the temperature profile
shown below.
Max. 240°C
200°C
Max. 165°C
1 to 4˚C/s
1 to 4˚C/s
GP2S60
Fig.14 Relative Collector Current vs.OMS
Card Moving Distance
100 OMS test card
d
1mm
80 Sensor + 0
VCE=2V
IF=4mA
d=1mm
60
40
20
3 2 1 0 1 2 3 4 5 6
OMS card moving distance (mm)
1 to 4˚C/s
25°C
Max.60s
Max.10s
Max.120s
Max.90s
I Other Precautions
An infrared lamp used to heat up for soldering may cause a localized temperature rise in the resin. So keep the package
temperature within that specified in Item 1. Also avoid immersing the resin part in the solder. Even if within the temperature
profile above, there is the possibility that the gold wire in package is broken in case that the deformation of PCW gives the
affection to lead pins. Please use after confirmation the conditions fully by actual solder reflow machine.

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet GP2S60.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
GP2S60Subminiature Reflective Type Photointerrupter
Reflective Type Photointerrupter
GP2S60Subminiature / Reflective Type PhotointerrupterSharp Electrionic
Sharp Electrionic

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar