|
|
Número de pieza | ICS554-01A | |
Descripción | LOW SKEW 1 TO 4 CLOCK BUFFER | |
Fabricantes | ICST | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ICS554-01A (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! www.DataSheet4U.com
ICS554-01A
LOW SKEW 1 TO 4 CLOCK BUFFER PECL IN, PECL OUT
Description
The ICS554-01A is a low skew clock buffer with a
single complimentary PECL input to four PECL
outputs. Part of ICS’ Clock BlocksTM family, this is our
lowest skew PECL clock buffer. The ICS554-01A is
footprint compatible with the ICS554-01, but requires
fewer passive components for termination thus
providing a cost-saving alternative. For parts which do
not require PECL inputs or outputs, see the ICS553 for
a 1 to 4 low skew buffer, or the ICS552-02 for a 1 to 8
low skew buffer. For more than 8 outputs see the
MK74CBxxx BuffaloTM series of clock drivers.
ICS makes many non-PLL and PLL based low skew
output devices as well as Zero Delay Buffers to
synchronize clocks. Contact us for all of your clocking
needs.
Features
• Input frequency up to 200 MHz
• Advanced CMOS process
• Outputs are skew matched to within 50 ps
• Packaged in 16-pin TSSOP
• One PECL input to 4 PECL output clock drivers
• Operating Voltages of 3.3 V or 5 V
• Industrial temperature range
• Functional equivalent to ICS554-01
• Simplified passive termination network compared to
ICS554-01
Block Diagram
IN
IN
VDD
VSS
Q0
Q0
Q1
Q1
Q2
Q2
Q3
Q3
MDS 554-01A A
1
Revision 101904
Integrated Circuit Systems ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
1 page ICS554-01A
LOW SKEW 1 TO 4 CLOCK BUFFER PECL IN, PECL OUT
DC Electrical Characteristics
VDD=3.3 V ±5% Ambient temperature -40 to +85 °C
Parameter
Symbol Conditions
Operating Voltage
VDD
Peak to Peak Input Voltage
IN
Input Common Mode Range IN VDD=3.3 V
Input Common Mode Range IN VDD=5 V
Output High Voltage
Output Low Voltage
Operating Supply Current
VOH Note 1
VOL Note 1
IDD No Load, 135 MHz
Short Circuit Current, 3.3 V
Short Circuit Current, 5 V
IOS
IOS
Min.
3.15
0.3
VDD-2
VDD-3.7
VDD-1.2
Typ.
80
±50
±60
Max. Units
5.25 V
1.0 V
VDD-0.6
VDD-0.6
V
VDD - 2.0 V
mA
mA
mA
Note 1: VOH and VOL can be set by the external resistor values on the PECL outputs.
note 2: IDD includes the current through the external resistors which can be modified.
AC Electrical Characteristics
VDD = 3.3 V ±5, Ambient Temperature -40 to +85 °C
Parameter
Symbol
Conditions
Input Frequency
Propagation Delay
VDD = 3.3 V
VDD = 5 V
Output to Output Skew
Crosspoint of pair
Duty Cycle
Crosspoint of pair
Min.
0
45
Typ.
2
2
0
50
Max.
200
50
55
Units
MHz
ns
ns
ps
%
MDS 554-01A A
5
Revision 101904
Integrated Circuit Systems ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet ICS554-01A.PDF ] |
Número de pieza | Descripción | Fabricantes |
ICS554-01 | LOW SKEW 1 TO 4 CLOCK BUFFER | ICST |
ICS554-01A | LOW SKEW 1 TO 4 CLOCK BUFFER | ICST |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |