DataSheet.es    


PDF 6SD106E Data sheet ( Hoja de datos )

Número de pieza 6SD106E
Descripción Six-pack SCALE Driver
Fabricantes Concept 
Logotipo Concept Logotipo



Hay una vista previa y un enlace de descarga de 6SD106E (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! 6SD106E Hoja de datos, Descripción, Manual

www.DataSheet4U.com
6&$/( 'ULYHU
Data Sheet 6SD106E
Six-pack SCALE Driver 6SD106E
for IGBTs and Power MOSFETs
Description
The SCALE drivers from
CONCEPT are based on a chip
set that was developed
specifically for the reliable
driving and safe operation of
IGBTs and power MOSFETs.
The name “SCALE” is an acronym for
the most outstanding properties of the
SCALE series of drivers:
LDI
LDI = Logic to Driver Interface
IGD = Intelligent Gate Driver
IGD
IGD
SCALE = Scaleable, Compact, All purpose, Low cost and Easy to use.
The SCALE driver is a winning project of the competition organized by “Technology
Center Switzerland 1998”. And ABB Switzerland AG honored the development of the
SCALE driver by distinguishing it as the “best power electronics project in 1998”.
Product Highlights
Applications
Suitable for IGBTs and power MOSFETs
Short circuit and overcurrent protection
Extremely reliable, long service life
High gate current of ±6A
Electrical isolation of 4000VAC
Electrically isolated status acknowledgement
Monitoring of power supply and self-monitoring
Switching frequency DC to >100kHz
Duty cycle: 0... 100%
High dv/dt immunity, guaranteed >100,000V/µs
Complete with DC/DC converter
Inverters
Motor drive technology
Traction
Railroad power supplies
Converters
Power engineering
Switched-mode power supplies
Radiology and laser technology
DC/DC converter
Research
RF generators and converters
Internet: www.IGBT-Driver.com
Page 1

1 page




6SD106E pdf
6&$/( 'ULYHU
Data Sheet 6SD106E
Fig. 3 Side view (top) / Mechanical fixing (bottom) 6SD106E
Height X: typ. 25mm in first series (1998); typ. 16mm from 1999
Internet: www.IGBT-Driver.com
Page 5

5 Page





6SD106E arduino
6&$/( 'ULYHU
Data Sheet 6SD106E
Output power and self-heating
The specified output power of the driver totals 6W (1W per channel). This typically
suffices to drive a 100A/1200V six-pack IGBT module with 25kHz. In the case of a
drive power of 6W, the typical input power of the driver is about 7W; the losses due
to the driver total about 1 W. Because CONCEPT cannot predict how the drivers will
be incorporated in the user’s application, no binding recommended value for self-
heating and thus for the maximum useful output power at high ambient temperatures
can be made. It is consequently recommended to check the self-heating of the system,
especially when it is used at higher temperatures.
For the calculation of the exact output power, reference should be made to
Application Note AN-9701 “IGBT drivers correctly calculated” from CONCEPT.
If you need any help, simply call our technical support
CONCEPT offers you expert help for your questions and problems:
E-Mail: [email protected] or on the Internet: www.CT-CONCEPT.com
Fax international ++41 32 / 322 22 51 (in Switzerland: 032 / 322 22 51)
Tel international ++41 32 / 322 42 36 (in Switzerland: 032 / 322 42 36)
Quite special: customized SCALE drivers
If you need a power MOSFET or IGBT driver that is not included in the delivery range,
don’t hesitate to contact CONCEPT or your CONCEPT sales partner.
CONCEPT engineers have more than 15 years experience in the development and
manufacture of intelligent drivers for power MOSFETs and IGBTs and have already
implemented a large number of customized solutions.
Exclusion Clause
CONCEPT reserves the right to make modifications to its technical data and product
specifications at any time without prior notice. The general terms and conditions of
delivery of CT-Concept Technology Ltd. apply.
Internet: www.IGBT-Driver.com
Page 11

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet 6SD106E.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
6SD106ESix-pack SCALE DriverConcept
Concept

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar