|
|
PDF LEDRA80X80 Data sheet ( Hoja de datos )
| Número de pieza | LEDRA80X80 | |
| Descripción | Red Area Light | |
| Fabricantes | Banner | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LEDRA80X80 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
® Model LEDRA80X80
Red Area Light
Area Light Features
• Lightly diffused, strobed, area light for PresencePLUS™ sensors. See Banner’s
website at www.bannerengineering.com for a complete lighting tutorial.
• Solid-state visible red LEDs
• Direct connection to PresencePLUS sensors, using 3-pin Pico-style connector
(Do not connect to any other power source)
• Two available bracket options
Light source
Illumination
Supply voltage and
current
Connections
Construction
Useful Life
Operating conditions
Cleaning instructions
Area Light Specifications
Visible red LED, 660 nm
Lightly diffused, high-intensity area light.
At a 12" distance the light illuminates a 4" diameter area that is within 50% of the center intensity.
Voltage supplied by P1B65Q, P2B65Q or select PresencePLUS sensors only (do not connect to any other power source).
Current: 300 mA max.
2 m (6.5') pigtail with 3-wire, 8 mm female Pico-style connector. Connect to select PresencePLUS sensors only.
Low-carbon steel with black zinc plating, acrylic window
10,000 hours (LED ON time). When operated within specifications, output will decrease less than 30% after 10,000
hours and less than 40% after 20,000 hours.
Temperature: 0° to +50°C (+32° to 122°F)
Relative humidity: 90% at 50°C (non-condensing) max.
Regularly remove any dust, dirt, or fingerprints from the light source.
1. Blow off dust using anti-static compressed air.
2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not use any
other chemicals for cleaning.
92.6 mm
(3.65")
110.4 mm
(4.35")
46.2 mm
(1.81")
8.2 mm
(0.32")
15.8 mm
(0.62")
61.0 mm
(2.40")
94.0 mm
(3.70")
Figure 1. Model LEDRA80X80 area light dimensions
Printed in USA
13.8 mm
(0.54")
02/03
4x M4 x 0.7
(7.1 mm Deep)
P/N 63220 rev. A
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet LEDRA80X80.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LEDRA80X80 | Red Area Light | Banner |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |