|
|
Número de pieza | EC3A01H | |
Descripción | N-Channel Silicon Junction FET - Electret Condenser Microphone Applications | |
Fabricantes | Sanyo Semicon Device | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de EC3A01H (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! www.DataSheet4U.com
Ordering number : ENN7301
EC3A01H
N-Channel Silicon Junction FET
EC3A01H
Electret Condenser Microphone Applications
Features
• Ultraminiature (1206 size) and thin (0.5mm) leadless
package.
• Especially suited for use in electret condenser
microphone for audio equipments and telephones.
• Excellent voltage characteristics.
• Excellent transient characteristics.
• Adoption of FBET process.
Specifications
Absolute Maximum Ratings at Ta=25°C
Package Dimensions
unit : mm
2209
1.200
0.34 0.500
3
[EC3A01H]
0.500
1
0.050
0.320
2
0.050
0.320
0.460
1.100
Bottom View
Top View
3
1 : Source
2 : Drain
2 1 3 : Gate
1.200
Marking
SANYO : ECSP1206
Parameter
Gate-to-Drain Voltage
Gate Current
Drain Current
Allowable Power Dissipation
Junction Temperature
Storage Temperature
Symbol
VGDO
IG
ID
PD
Tj
Tstg
Electrical Characteristics at Ta=25°C
Conditions
Ratings
--20
10
1
100
150
--55 to +150
Unit
V
mA
mA
mW
°C
°C
Parameter
Gate-to-Drain Breakdown Voltage
Cutoff Voltage
Drain Current
Forward Transfer Admittance
Input Capacitance
Reverse Transfer Capacitance
Symbol
Conditions
V(BR)GDO
VGS(off)
IDSS
yfs
Ciss
Crss
IG=--100µA
VDS=5V, ID=1µA
VDS=5V, VGS=0
VDS=5V, VGS=0, f=1kHz
VDS=5V, VGS=0, f=1MHz
VDS=5V, VGS=0, f=1MHz
min
--20
--0.2
140*
0.5
Ratings
typ
max
Unit
V
--0.6 --1.2 V
350*
µA
1.2 mS
3.5 pF
0.65
pF
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
O0504 TS IM TB-00000763 No.7301-1/5
1 page EC3A01H
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of October, 2004. Specifications and information herein are subject
to change without notice.
PS No.7301-5/5
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet EC3A01H.PDF ] |
Número de pieza | Descripción | Fabricantes |
EC3A01B | Electret Condenser Microphone Applications | Sanyo Semicon Device |
EC3A01H | N-Channel Silicon Junction FET - Electret Condenser Microphone Applications | Sanyo Semicon Device |
EC3A01T | Electret Condenser Microphone Applications | Sanyo Semicon Device |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |