DataSheet.es    


PDF PBSS8110D Data sheet ( Hoja de datos )

Número de pieza PBSS8110D
Descripción NPN low VCEsat (BISS) transistor
Fabricantes NXP Semiconductors 
Logotipo NXP Semiconductors Logotipo



Hay una vista previa y un enlace de descarga de PBSS8110D (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! PBSS8110D Hoja de datos, Descripción, Manual

www.DataSheet4U.com
PBSS8110D
100 V, 1 A NPN low VCEsat (BISS) transistor
Rev. 01 — 23 April 2004
Product data sheet
1. Product profile
1.1 General description
NPN low VCEsat transistor in a plastic SOT457 (SC-74) package.
1.2 Features
s SOT457 package
s Low collector-emitter saturation voltage VCEsat
s High collector current capability IC and ICM
s High efficiency, leading to less heat generation.
1.3 Applications
s Major application segments:
x Automotive 42 V power
x Telecom infrastructure
x Industrial.
s DC-to-DC converter
s Peripheral driver
x Driver in low supply voltage applications (e.g. lamps and LEDs)
x Inductive load drivers (e.g. relays, buzzers and motors).
1.4 Quick reference data
Table 1:
Symbol
VCEO
IC
ICM
RCEsat
Quick reference data
Parameter
collector-emitter voltage
collector current (DC)
peak collector current
equivalent on-resistance
Conditions
Min Typ Max Unit
- - 100 V
- - 1A
- - 3A
- - 200 m

1 page




PBSS8110D pdf
Philips Semiconductors
7. Characteristics
Table 7: Characteristics
Tj = 25 °C unless otherwise specified.
Symbol Parameter
Conditions
ICBO
ICES
collector-base cut-off
current
collector-emitter
cut-off current
VCB = 80 V; IE = 0 A
VCB = 80 V; IE = 0 A;
Tj = 150 °C
VCE = 80 V; VBE = 0 V
IEBO emitter-base cut-off VEB = 4 V; IC = 0 A
current
hFE
VCEsat
RCEsat
DC current gain
collector-emitter
saturation voltage
equivalent
on-resistance
VCE = 10 V; IC = 1 mA
VCE = 10 V; IC = 250 mA
VCE = 10 V; IC = 0.5 A
VCE = 10 V; IC = 1 A
IC = 100 mA; IB = 10 mA
IC = 500 mA; IB = 50 mA
IC = 1 A; IB = 100 mA
IC = 1 A; IB = 100 mA
VBEsat
base-emitter
saturation voltage
IC = 1 A; IB = 100 mA
VBEon
base-emitter turn-on VCE = 10 V; IC = 1 A
voltage
fT transition frequency VCE = 10 V; IC = 50 mA;
f = 100 MHz
Cc collector capacitance VCB = 10 V; IE = Ie = 0 A;
f = 1 MHz
[1] Pulse test tp 300 µs; δ ≤ 0.02.
PBSS8110D
100 V, 1 A NPN low VCEsat (BISS) transistor
Min Typ Max Unit
- - 100 nA
- - 50 µA
- - 100 nA
- - 100 nA
150 -
-
150 -
500
[1] 100
-
-
[1] 80
-
-
- - 40 mV
- - 120 mV
- - 200 mV
[1] -
160 200 m
- - 1.05 V
- - 0.9 V
100 - - MHz
- - 7.5 pF
9397 750 12566
Product data sheet
Rev. 01 — 23 April 2004
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
5 of 12

5 Page





PBSS8110D arduino
Philips Semiconductors
PBSS8110D
100 V, 1 A NPN low VCEsat (BISS) transistor
10. Data sheet status
Level Data sheet status [1] Product status [2] [3]
I Objective data
Development
II Preliminary data
Qualification
III Product data
Production
Definition
This data sheet contains data from the objective specification for product development. Philips
Semiconductors reserves the right to change the specification in any manner without notice.
This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at
URL http://www.semiconductors.philips.com.
[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
11. Definitions
12. Disclaimers
Short-form specification — The data in a short-form specification is
extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with
the Absolute Maximum Rating System (IEC 60134). Stress above one or
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any
other conditions above those given in the Characteristics sections of the
specification is not implied. Exposure to limiting values for extended periods
may affect device reliability.
Application information — Applications that are described herein for any
of these products are for illustrative purposes only. Philips Semiconductors
make no representation or warranty that such applications will be suitable for
the specified use without further testing or modification.
13. Contact information
Life support — These products are not designed for use in life support
appliances, devices, or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors
customers using or selling these products for use in such applications do so
at their own risk and agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to
make changes in the products - including circuits, standard cells, and/or
software - described or contained herein in order to improve design and/or
performance. When the product is in full production (status ‘Production’),
relevant changes will be communicated via a Customer Product/Process
Change Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no
license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise
specified.
For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: [email protected]
9397 750 12566
Product data sheet
Rev. 01 — 23 April 2004
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
11 of 12

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet PBSS8110D.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
PBSS8110DNPN low VCEsat (BISS) transistorNXP Semiconductors
NXP Semiconductors
PBSS8110SNPN low VCEsat (BISS) transistorNXP Semiconductors
NXP Semiconductors
PBSS8110TNPN low VCEsat (BISS) transistorNXP Semiconductors
NXP Semiconductors
PBSS8110XNPN transistorNXP Semiconductors
NXP Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar