|
|
Número de pieza | OX16PCI954 | |
Descripción | HIGH-PERFORMANCE UART FAMILY REFERENCE DRIVERS | |
Fabricantes | Oxford Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de OX16PCI954 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! www.DataSheet4U.com
OX16C95x
OX16PCI954
HIGH-PERFORMANCE UART FAMILY
REFERENCE DRIVERS
This document describes installation and use of the Oxford Semiconductor reference
drivers for the OX16C95x high performance UART family, including the OX16PCI954
Quad UART with PCI interface.
Version 2.0 (01 February 2000)
1 page Custom solutions & drivers for the OX16PCI954
VERSION 1.0
4.1.2 Windows NT4 driver for OX16PCI954
Overview
The Windows NT4 driver creates a Device Object for each port, and registers this with the operating system. The serial port driver enables
the following 16C95x features:
• 128-byte receiver and transmitter FIFOs
• Optimized receiver interrupt handling – uses readable fill levels and thresholds
• Automatic clock speed detection
• Memory-mapped operation for efficient throughput
A separate parallel port driver is provided, which creates the device Object and registers it with the Printer class driver.
The Windows NT4 driver searches the PCI bus for the VendorID / DeviceID combinations specified in the oxser.inf file. If the chip has been
reconfigured with the EEPROM (e.g. DeviceID reconfigured as 0x950A to be a two-serial port solution) the oxser.inf file will need to be
modified (see application note “Custom Drivers” for more information).
Installation
Install the hardware by following system instructions. Power up the system. Then follow the instructions below depending on which
functions are required. To upgrade the NT4 driver, simply install over the existing version.
Serial driver
1. Run “Install_Serial.exe” from the \NT4_Serial subdirectory on the disk.
2. When the install application starts, click Next to continue
3. Ensure ‘install’ is selected, then click Next.
4. Click OK to accept the licence agreement.
5. The system will install the driver and start it. The ports are immediately ready for use
Parallel driver
1. Run “Install_Parallel.exe” from the \NT4_Parallel subdirectory on the disk.
2. When the install application starts, click Next to continue
3. Ensure ‘install’ is selected, then click Next.
4. Click OK to accept the licence agreement.
5. The system will install the driver and prompt for a restart. The port is available for use after the restart.
Oxford Semiconductor Ltd.
5
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet OX16PCI954.PDF ] |
Número de pieza | Descripción | Fabricantes |
OX16PCI952 | Integrated High Performance Dual UARTs | Oxford Semiconductor |
OX16PCI954 | HIGH-PERFORMANCE UART FAMILY REFERENCE DRIVERS | Oxford Semiconductor |
OX16PCI954 | Integrated Quad UART and PCI interface | Oxford Semiconductor |
OX16PCI958 | Octal UART | Oxford Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |