|
|
PDF OPB86x Data sheet ( Hoja de datos )
| Número de pieza | OPB86x | |
| Descripción | (OPBxxx) Slotted Optical Switches | |
| Fabricantes | Optek Technology | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de OPB86x (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Slotted Optical Switch
OPB355, OPB360, OPB370, OPB380, OPB390
OPB859, OPB860, OPB870, OPB880, OPB890
Series
Features:
• 0.125” (3.175 mm) slot width
• Choice of aperture (0.050” or 0.010” width)
• Choice of opaque or IR transmissive shell material
• Choice of mounting configurations
• Choice of lead spacing or wires
Product Photo Here
Description:
Each device in this series provides the flexibility of a custom device from a standard product line. Building from a
standard housing with a 0.125” (3.175 mm) wide slot, a user can choose aperture width, opaque or IR
transmissive housing shell material, PCBoard lead spacing or wires and mounting tab configuration.
Housings are made from an opaque grade of injection-molded plastic to minimize sensitivity to both visible and
near-infrared light. Discrete shells exposed on the parallel faces inside each device’s throat are made from either
IR transmissive plastic (for applications where dust protection is needed) or from opaque plastic with aperture
openings (for applications that require maximum protection against ambient light).
Phototransistor sensor devices include the OPB859, PB360, OPB370, OPB380, OPB390, OPB860 and OPB870,
while the OPB355 provides a photodiode sensor. The photodiode sensor has a lower and more linear output-
versus-light input than the phototransistor models.
The OPB355, OPB360, OPB370, OPB859, OPBD8a6ta0SahnedeOt4PUB.c8o7m0 are designed for direct connection to through
hole PCBoards. The OPB380, OPB390, OPB880 and OPB890 have 26 AWG wires connected directly to the
device for remote sensing applications.
DataShee
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
• Non-contact object sensing
• Assembly line automation
• Machine automation
• Equipment safety
• Machine safety
OPB360, OPB370, OPB380, OPB390
OPB859
OPB860, OPB870, OPB880, OPB890
13
OPB355
13
24
24
RoHS
DataSheet4U.com
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking.
Vibra-Tite evaporates fast without causing structural failure in OPTEK’s molded plastics.
Applies to: OPB360, OPB370, OPB380, OPB390
and OPB860, OPB870, OPB880, OPB890.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A 02/06
Page 1 of 10
DataSheet4 U .com
1 page  
www.DataSheet4U.com
Slotted Optical Switch
OPB355, OPB360, OPB370, OPB380, OPB390
OPB859, OPB860, OPB870, OPB880, OPB890
Series
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Storage Temperature(1) (2)
OPB355, OPB360, OPB370, OPB859, OPB860, OPB870 Series
OPB380, OPB390, OPB880, OPB890 Series
Operating Temperature(1) (2)
Lead Soldering Temperature(7)
Input LED
Forward DC Current
OPB355, OPB360, OPB370, OPB380, OPB390, OPB859, OPB860, OPB870, OPB880, OPB890
Peak Forward Current (1µs pulse width, 300 pps)
Reverse DC Voltage
Power Dissipation(2)
Output Phototransistor/Diode
Cathode-Anode Reverse Voltage -OPB355
Collector-Emitter Voltage
OPB360, OPB370, OPB380, OPB390, OPB859, OPB860, OPB870, OPB880, OPB890 Series
et4U.com
Emitter-Collector Voltage
Collector DC Current
Power Dissipation(1)
DataSheet4U.com
-40° C to +100° C
-40° C to +85° C
-40° C to +85° C
260° C
50 mA
1A
2V
75 mW
60 V
30 V
5V
30 mA
100 mW
DataShee
Notes:
(1) For wire series (OPB380, OPB390, OPB880 and OPB890), maximum storage and operating temperature is limited by the
temperature rating of the lead wires.
(2) Derate linearly 1.67 mW/° C above 25° C.
(3) For OPB355, OPB360 and OPB370, polarity is denoted by color of housing top: LED (clear); sensor (black).
(4) Cleaning agents methanol and isopropanol are recommended. Spray or wipe; do not submerge.
(5) OPB380 and OPB390 wire terminations have 24” of 7-strand 26 AWG UL 1429 insulated wire on each terminal. These devices
incorporate a wire strain relief at the housing surface. The insulation colors and functions are: IRED anode (red); IRED cathode
(black); phototransistor collector (white); phototransistor emitter (green).
(6) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(7) All parameters were tested using pulse technique.
DataSheet4U.com
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A 02/06
Page 5 of 10
DataSheet4 U .com
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet OPB86x.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| OPB860 | (OPB860 / OPB870 Series) Slotted Optical Switches | Optek Technology |
| OPB860N11 | SLOTTED OPTICAL SWITCH |  QT Optoelectronics |
| OPB860N51 | SLOTTED OPTICAL SWITCH | QT Optoelectronics |
| OPB860N55 | SLOTTED OPTICAL SWITCH | QT Optoelectronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |