|
|
Número de pieza | DW-224E-C93 | |
Descripción | CD/DVD ROM Drive | |
Fabricantes | TEAC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de DW-224E-C93 (archivo pdf) en la parte inferior de esta página. Total 34 Páginas | ||
No Preview Available ! www.DataSheet4U.com
TEAC DW-224E-C93
CD-RW/DVD-ROM DRIVE
HARDWARE SPECIFICATION
DataSheet4U.com
DataShee
DataSheet4U.com
DataSheet4 U .com
Rev. B
34 sheets in Total
1 page www.DataSheet4U.com
et4U.com
DataSheet4U.com
DataShee
DataSheet4U.com
DataSheet4 U .com
(Fig. 3.1-1) External view of the drive
–3–
5 Page www.DataSheet4U.com
7. RELIABILITY
(1) Mean time between failures (MTBF)
: 60,000POH or more (the frequency of use should be 10% at normal
temperature and humidity)
(2) Mean time to repair (MTTR) : 30minutes
(3) Loading/ejecting life
: 10,000times or more
(4) Power ON/OFF life
: 60,000 times or more
(5) Laser diode life
: MTTF 9,000 hours (Duty 50% pulse 83mW, 60°C)
(6) Seeking life
: 2 × 106 times or more (random access, 25°C, duty; 20% or less)
(7) Error rate
(a) Read error rate
DVD
: Once per 1012 bits or less
CD : MODE 1 and MODE 2 (FORM 1) : Once per 1012 bits or less
MODE 2 (FORM 2) and CDDA : Once per 109 bits or less
(b) Seek error rate
: Once per 106 seeks or less
(c) Seek error rate
: Once per 106 seeks or less
(8) Self-diagnosis
(a) When power is switched ON: Various controllers, ROM, RAM, buffer, ECC circuit, etc.
(b) When disc is inserted
: Servo circuit, signal processors, etc.
et4U.com
8. SAFETY STANDARDS
The drive complies with the following safety standards:
(1) UL standard
(2) CSA standard
(3) TÜV standard
DataSheet4U.com
(4) CE standard
DataShee
9. FRONT INDICATOR
(1) Location : Refer to Fig. 3.1-1.
(2) Color
: Green
(3) Lighting conditions
(a) Continuous on
• During seek
• Transfer of the read data to the host is under way.
(b) Flashing with a period of 3 second (Duty 50%)
• During write
• While audio is being played
(c) Flashing with a period of 1 second (Duty 50%)
• From POR or tray loading to the end of TOC read (when the disc is present)
• From POR or tray loading to the end of detecting the disc (when the disc is not present). If an error
which is considered to arise from the disc occurs, flashing continues until the disc is ejected. If an error
which seems to rest with the drive’s hardware, flashing continues until the power is switched OFF.
10. DRIVE CONFIGURATION
The setting to master or slave is determined by the −CSEL signal (interface connector 47 pin).
If the −CSEL signal is at low level, the drive is set to the slave, and if it is open or at high level, it is set to the
master.
DataSheet4U.com
–9–
DataSheet4 U .com
11 Page |
Páginas | Total 34 Páginas | |
PDF Descargar | [ Datasheet DW-224E-C93.PDF ] |
Número de pieza | Descripción | Fabricantes |
DW-224E-C93 | CD/DVD ROM Drive | TEAC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |