|
|
Número de pieza | TC74HC574AP | |
Descripción | (TC74HC564 / TC74HC574) OCTAL D -TYPE FLIP-FLOP | |
Fabricantes | Toshiba Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TC74HC574AP (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! TC74HC564AP/AF,574AP/AF/AFW
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74HC564AP,TC74HC564AF
TC74HC574AP,TC74HC574AF,TC74HC574AFW
Octal D-Type Filp-Flop with 3-State Output
TC74HC564AP/AF
Inverting
TC74HC574AP/AF/AFW Non-Inverting
The TC74HC564A and HC574A are high speed CMOS OCTAL
FLIP-FLOPs with 3-STATE OUTPUT fabricated with silicon gate
C2MOS technology.
They achieve the high speed operation similar to equivalent
LSTTL while maintaining the CMOS low power dissipation.
These 8-bit D-type flip-flops are controlled by a clock input
(CK) and an output enable input ( OE ).
The TC74HC564A has inverting outputs, and the
TC74HC574A has non-inverting outputs.
All inputs are equipped with protection circuits against static
discharge or transient excess voltage.
Note: xxxFW (JEDEC SOP) is not available in
Japan.
TC74HC564AP, TC74HC574AP
TC74HC564AF, TC74HC574AF
Features
• High speed: fmax = 62 MHz (typ.) at VCC = 5 V
• Low power dissipation: ICC = 4 µA (max) at Ta = 25°C
• High noise immunity: VNIH = VNIL = 28% VCC (min)
• Output drive capability: 15 LSTTL loads
• Symmetrical output impedance: |IOH| = IOL = 6 mA (min)
• Balanced propagation delays: tpLH ∼− tpHL
• Wide operating voltage range: VCC (opr) = 2 to 6 V
• Pin and function compatible with 74LS564/574
TC74HC574AFW
Weight
DIP20-P-300-2.54A
SOP20-P-300-1.27A
SOP20-P-300-1.27
SOL20-P-300-1.27
: 1.30 g (typ.)
: 0.22 g (typ.)
: 0.22 g (typ.)
: 0.46 g (typ.)
1 2006-02-01
1 page Timing Requirements (input: tr = tf = 6 ns)
Characteristics
Symbol
Minimum pulse width
(CK)
Minimum set-up time
(Dn)
Minimum hold time
(Dn)
tW (H)
tW (L)
ts
th
Clock frequency
f
TC74HC564AP/AF,574AP/AF/AFW
Test Condition
⎯
⎯
⎯
⎯
VCC (V)
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
Ta = 25°C
Typ. Limit
⎯ 75
⎯ 15
⎯ 13
⎯ 75
⎯ 15
⎯ 13
⎯0
⎯0
⎯0
⎯6
⎯ 31
⎯ 36
Ta =
−40 to
85°C
Limit
95
19
16
95
19
16
0
0
0
5
24
28
Unit
ns
ns
ns
MHz
5 2006-02-01
5 Page Note: Lead (Pb)-Free Packages
DIP20-P-300-2.54A SOP20-P-300-1.27A
TC74HC564AP/AF,574AP/AF/AFW
RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice. 021023_D
060116EBA
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc. 021023_A
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk. 021023_B
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations. 060106_Q
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of
TOSHIBA or others. 021023_C
• The products described in this document are subject to the foreign exchange and foreign trade laws. 021023_E
11 2006-02-01
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet TC74HC574AP.PDF ] |
Número de pieza | Descripción | Fabricantes |
TC74HC574AF | (TC74HC564 / TC74HC574) OCTAL D -TYPE FLIP-FLOP | Toshiba Semiconductor |
TC74HC574AFW | (TC74HC564 / TC74HC574) OCTAL D -TYPE FLIP-FLOP | Toshiba Semiconductor |
TC74HC574AP | (TC74HC564 / TC74HC574) OCTAL D -TYPE FLIP-FLOP | Toshiba Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |