|
|
PDF DMF5005NF-SEW-BBE-CQ Data sheet ( Hoja de datos )
| Número de pieza | DMF5005NF-SEW-BBE-CQ | |
| Descripción | LCD Module Technical Specification | |
| Fabricantes | OPTREX CORPORATION | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DMF5005NF-SEW-BBE-CQ (archivo pdf) en la parte inferior de esta página. Total 17 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
OPTREX LCD Module Technical Specification
First Edition
Jul 24, 2001
Final Revision
******
Type No.
DMF5005NF-SEW-BBE-CQ
Approved by (Production Div.)
Checked by (Quality Assurance Div.)
Checked by (Design Engineering Div.)
Prepared by (Production Div.)
Table of Contents
1. General Specifications.................................................................................................................................. 2
2. Electrical Specifications............................................................................................................................... 3
3. Optical Specifications ................................................................................................................................... 7
4. I/O Terminal...................................................................................................................................................... 9
5. Test................................................................................................................................................................... 11
6. Appearance Standards ............................................................................................................................... 12
7. Code System of Production Lot.........D...a...t.a..S...h...e..e...t.4..U......c..o...m..................................................................... 15
8. Type Number.................................................................................................................................................. 15
9. Applying Precautions .................................................................................................................................. 15
10. Precautions Relating Product Handling................................................................................................ 16
11. Warranty ........................................................................................................................................................ 17
Revision History
Rev. Date
Page
Comment
DataShee
DataSheet4U.com
DMF5005NF-SEW-BBE-CQ (CQ) No. 2001-0149
DataSheet4 U .com
OPTREX CORPORATION
Page 1/17
DataSheet4U.com
1 page  
www.DataSheet4U.com
et4U.com
2.4.Power Supply ON/OFF Sequence
2.4.1.ON Sequence
SIGNAL
VCC
SIGNAL
(Without RESET Signal)
VEE
0≤ t
0≤ t
2.4.2.OFF Sequence
LEVEL
VCC
VSS
VCC
VSS
VCC
VSS
VEE
0≤ t
0≤t
DataSheet4U.com
LEVEL
VCC
VSS
VCC
VSS
VCC
VSS
VEE
SIGNAL
VCC
SIGNAL
(Without RESET Signal)
VEE
DataShee
2.4.3.Reset Sequence
SIGNAL
RESET
T>250 µs
VCC
VEE
T≥50ms
Power On
T≥10 ms
T≥0 T≥50ms
Reset
Reset Cancellation
T≥0
T≥0
Power Off
LEVEL
H Level
L Level
VCC
VSS
VCC
VEE
Please maintain the above sequence when turning on and off the power supply of the
module.
If VEE is supplied to the module while internal alternate signal for LCD driving (M) is
unstable or RESET is active, DC component will be supplied to the LCD panel. This may
cause damage to the LCD module.
DataSheet4U.com
DMF5005NF-SEW-BBE-CQ (CQ) No. 2001-0149
OPTREX CORPORATION
Page 5/17
DataSheet4 U .com
DataSheet4U.com
5 Page 
www.DataSheet4U.com
et4U.com
5.Test
No change on display and in operation under the following test condition.
Conditions:
Unless otherwise specified, tests will be conducted under the following condition.
Temperature: 20±5°C
Humidity : 65±5%RH
tests will be not conducted under functioning state.
No. Parameter
Conditions
Notes
1 High Temperature Operating 50°C±2°C, 96hrs (operation state)
2 Low Temperature Operating 0°C±2°C, 96hrs (operation state)
1
3 High Temperature Storage
60°C±2°C, 96hrs
2
4 Low Temperature Storage
-20°C±2°C, 96hrs
1,2
5 Damp Proof Test
40°C±2°C,90~95%RH, 96hrs
1,2
6 Vibration Test
Total fixed amplitude : 1.5mm
3
Vibration Frequency : 10~55Hz
One cycle 60 seconds to 3 directions of X, Y, Z for
each 15 minutes
7 Shock Test
To be measured after dropping from 60cm high on
the concrete surface in packing state.
DataSheet4U.com
F
Dropping method corner dropping
A corner : once
E
B
GD C
Edge dropping
B,C,D edge : once
A Face dropping
60cm
E,F,G face : once
Concrete Surface
Note 1 : No dew condensation to be observed.
Note 2 :
The function test shall be conducted after 4 hours storage at the normal
Temperature and humidity after removed from the test chamber.
Note 3 : Vibration test will be conducted to the product itself without putting it in a
container.
DataShee
DataSheet4U.com
DMF5005NF-SEW-BBE-CQ (CQ) No. 2001-0149
DataSheet4 U .com
OPTREX CORPORATION
Page 11/17
DataSheet4U.com
11 Page | ||
| Páginas | Total 17 Páginas | |
| PDF Descargar | [ Datasheet DMF5005NF-SEW-BBE-CQ.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DMF5005NF-SEW-BBE-CQ | LCD Module Technical Specification | OPTREX CORPORATION |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |