|
|
PDF WSH42FB Data sheet ( Hoja de datos )
| Número de pieza | WSH42FB | |
| Descripción | Single Coil Hall Effect IC with Thermal Lock Protection and Auto-Restart | |
| Fabricantes | Winson Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de WSH42FB (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
WSH42FB
Single Coil Hall Effect IC with Thermal Lock
Protection and Auto-Restart
Features:
Operate from 2.8V to 14V supply voltage.
On-chip Hall sensor.
Internal bandgap regulator allows temperature compensated operations and a
wide operating voltage range.
Output sinking capability up to 350mA for driving large load.
Lower current change rate reduces the peak output voltages during switching.
Available in rugged low profile SIP-4L,SIP-5L and SOT-25 packages.
Built-in Frequency Generator.
Built-in protection diode for reverse power supply fault.
Prevent the fail situation during lock status or high temperature
Built-in thermal lock protection and auto-restart function.
General Deswcrwiptiwon.:DataSheet4U.com
WSH42FB is designed to integrate Hall sensor with two push-pull output drivers and
frequency generator together on the same chip, it is suitable for single coil DC
brushless motors. It includes a temperature compensated voltage regulator, a
differential amplifier, a Hysteresis controller, complementary bi-direction drivers for
sinking and driving large current load and an open-collector frequency generator
capable of sinking 10mA current load. An on-chip protection diode is implemented to
prevent reverse power fault. It also includes coil parts. You can eliminate all the
external components for the function of FG and reverse protection diode. And
built-in thermal lock protection and auto-restart function will automatically shutdown
power at 110°C to prevent the coils be damaged during high temperature and
auto-restart at 105°C. It can replace the function of lock protection and auto-restart at
low cost.
WSH42FB are rated for operation over temperature range from –20˚ C to 90˚C and
voltage ranges from 2.8V to 14V.
Winson reserves the right to make changes to improve reliability or manufacturability.
©Winson, 2005/9/23
1
DataSheet4 U .com
www.DataSheet4U.com
1 page  
www.DataSheet4U.com
2.SIP-5L
WSH42FB
3. SOT-25
www.DataSheet4U.com
Winson reserves the right to make changes to improve reliability or manufacturability.
©Winson, 2005/9/23
5
DataSheet4 U .com
www.DataSheet4U.com
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet WSH42FB.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| WSH42FB | Single Coil Hall Effect IC with Thermal Lock Protection and Auto-Restart | Winson Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |