|
|
PDF SA8400 Data sheet ( Hoja de datos )
| Número de pieza | SA8400 | |
| Descripción | Super Audio CD Player | |
| Fabricantes | Marantz | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SA8400 (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
Model SA8400 User Guide
Super Audio CD Player
1 page  
* To protect your discs from damage, avoid
placing them in the following locations.
• Where they will be exposed to direct sunlight or
where they will be close to a heater or other heat-
radiating appliance
• Where the humidity level is high or it is very dusty
• Near a window or other such location where they
may be exposed to rain
* Get into the habit of putting the discs back in
their cases after use.
INAPPROPRIATE PLACES FOR
INSTALLATION
To keep your player in perfect working order for the
longest possible time, avoid installing the player in
the following locations.
• Wherever it will be exposed to direct sunlight
• Wherever it will be close to a heater or other heat-
radiating appliance
• Wherever the humidity is high or ventilation is poor
• Wherever it is very dusty
• Wherever it will be subject to vibration
• On top of a rickety stand or in an unstable location
which is tilted at an angle
• On top of an amplifier or other component which
dissipates a great deal of heat
• In an audio rack with little space at the top and
bottom or other location where the heat dissipation
will be obstructed
To ensure proper heat dissipation, install the player
while leaving clearances between the player and
wall or other components, as shown in the figure
below.
10 cm or more
POWER ON/OFF
2 cm or more 10 cm or more
DISPLAY
OFF
SOUND MODE
TIME
TEXT
DISPLAY
PLAY
STOP
PAUSE
OPEN/CLOSE
/
/
PHONES
LEVEL
-+
5 cm or more
CAUTIONS ON HANDLING POWER CORD
• Do not touch the power cord with wet hands.
• When disconnecting the power cord, always make
sure that you take hold of the plug. Yanking out or
bending the cord can damage it and/or cause
electric shocks or a fire.
• Get into the habit of disconnecting the power plug
before leaving home.
DO NOT ATTEMPT REPAIRS YOURSELF
• Refrain from lubricating the player: doing so can
cause malfunctioning.
• Only qualified engineers with specialized expertise
are authorized to repair the pick-up and parts
inside the player.
PRECAUTIONS
• In winter, droplets of water form on the insides of
the windows of a heated room: this is called
condensation. This player uses an optical lens,
so the condensation may form in the following
cases.
- In a room immediately after the heating has
been turned on
- In a room where the humidity level is high
- When the player has been suddenly brought
from a cold location into a warm room
Since, in cases like this, the track numbers may
not be read and the player is prevented from
operating properly, wait about 30 minutes, and then
operate the player.
• This player may cause interference on a tuner or
TV set. If this is the case, place it further away
from the tuner or TV set.
• Compact discs have much less noise than analog
records and hardly any noise is heard before play
starts. Bear in mind, therefore, that if the volume
control on the amplifier is set too high, you will risk
damaging other audio components.
• This player is designed to play Super Audio CD
and normal music CDs only. It cannot play CD-
ROMs used with personal computers, game CDs,
video CDs or DVDs (video/audio).
• We do not recommend the use of lens cleaners.
USING REMOTE CONTROL UNIT
Cautions on handling batteries
Misuse of the batteries can result in electrolyte
leakage, rupturing, corrosion, etc.
Bear in mind the following points when using
batteries.
• Remove the batteries from the remote control
unit if the unit is not going to be used for a
prolonged period (a month or more).
• Do not use an old battery together with a new
one.
• Insert the batteries while ensuring that their
and poles are properly aligned with
the corresponding markings on the remote
control unit.
• Batteries with the same shape may have
different voltages. Do not use different types
of batteries together.
• If electrolyte has leaked, thoroughly wipe the
inside of the battery compartment, and then
insert new batteries.
• When batteries which are no longer required
are to be discarded, follow the directions
(regulations) laid down by the local authorities
in the area concerned for their disposal.
LOADING BATTERIES
Batteries in this remote control unit have a life of
approximately 1 year under normal operating
conditions. If the remote control unit is not going to
be used for an extended period of time, remove the
batteries. Also, if you notice that the batteries are
starting to run down, replace them as soon as
possible.
q Remove the battery cover.
w Insert the batteries with correct +/– orientation.
Two AA-size (R6) batteries
e Close the battery cover until it clicks shut.
REMOTE CONTROL
Operate the remote control unit (RC8400SA) within
a distance of approx. 5 m from the infrared signal
reception window (remote sensor) on the front of the
Super Audio CD player.
Remote control operation may not be possible if the
remote control unit’s transmitter is not pointing in the
direction of the remote sensor or if there is an
obstruction between the transmitter and the remote
sensor.
Remote control operating range
Approx. 5m
60°
Remote control unit (RC8400SA)
DO NOT PLACE OBJECTS ON TOP
• Refrain from placing any objects on top of the
player.
3
5 Page 
OPERATION
To start playback form the first track
Press PLAY button.
SWITCHING SOUND MODE (SUPER AUDIO CD)
* In this instruction manual, some operations can only be performed with the remote control. For
operations that can be performed with buttons both on the main unit and on the remote control, the
button names are shown in the
mark. And for operations that can only be performed with
buttons on the remote control, the button names are shown in the
mark.
CONNECTING THE POWER SUPPLY
1 Plug the power cable into AC IN jack on the back
panel.
q Press POWER switch to turn on.
Display indications
AC
IN
2 Turn on the power switch of the audio unit
(amplifier, etc.) that is connected with this unit. Set
the selector on the connected unit to this unit.
3 Plug the power cable into an AC outlet.
NORMAL PLAYBACK
SUPER AUDIO CD PLAYER PLAYBACK
POWER ON/OFF
G
DISPLAY
OFF
SOUND MODE
TIME
TEXT
DISPLAY
PLAY
STOP
PAUSE
OPEN/CLOSE
/
/
PHONES
LEVEL
-+
HM
The display changes in order from “TOC
Reading” to “No Disc” (if there is no disc inserted)
to “Super Audio CD” (for Super Audio CD).
w Press the OPEN/CLOSE button
The disc tray comes out. Place the disc with label
side up on the tray.
To play a single (8cm) CD, place the disc with
the indentation at the center of the tray.
e Press OPEN/CLOSE button.
r Press PLAY button.
Disc type is automatically detected and playback
is started. Track number and track elapsed
time(minute, second) appear on the display.
* For Super Audio CD/CD hybrid-layer discs (See
page 2), the layer that is set in the start sound
mode (See page 10) is played. To change the
layer, use the SOUND MODE button. (See page
9)
(Exp.:Track 6, Elapsed time 2 min 8 sec)
Number of current track Minutes Seconds
TRK
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Remaining track numbers
Playback automatically stops at the end of the
final track.
To stop playback
Press STOP button.
To eject disc
Press OPEN/CLOSE button to open the disc tray
and take the disc off. Press the button again to close
the tray.
Disc tray must be closed when the unit is not be
used.
To pause playback
Press PAUSE button.
PAUSE indicator will light and playback is paused at
the point that the button is pressed. To restart
playback, press PAUSE button again or press
PLAY button.
To change time display
Press TIME button.
Each time TIME button is pressed, display will
change in the following order. “Track elapsed time”
→ “Track remaining time” → “Total remaining time”
→ “Track elapsed time”.
• Track remaining time
(The remaining playing time from the playing
point to the end of the current track)
“SING REMAIN”
“–” is displayed is displayed
TRK
SING REMAIN
15 16 17 18 19 20
• Total remaining time
(The remaining playing time from the playing
point to the end of the last track)
“TOTAL REMAIN”
“–” is displayed is displayed
TRK
TOTAL
REMAIN
15 16 17 18 19 20
* If TIME button is pressed when Super Audio CD
disc that supports text is in use, time display is given
priority and the text information will not be displayed
afterward. To see the text information, press TEXT
button.
POWER ON/OFF
DISPLAY
OFF
SOUND MODE
TIME
TEXT
DISPLAY
PLAY
STOP
PAUSE
OPEN/CLOSE
/
/
PHONES
LEVEL
-+
SOUND MODE Button
q Press SOUND MODE button in stop mode
(not playing).
The currently selected layer or area is shown on
the display window. (CD or Super Audio CD)
If SOUND MODE button is pressed again, a
playable layer or area will be shown, and the layer
or area will be switched to new one.
* When layer or area is switched, TOC will be
read again.
* If a CD disc or Super Audio CD disc with stereo
area only is loaded, sound mode cannot be
changed.
* The sound mode on hybrid layer discs will be
changed in the following order.
Super Audio CD stereo area → CD layer →
Super Audio CD stereo area
* Sound mode can be selected while the tray is
open. Select a desired layer or area and press
PLAY button then the tray will close and
playback will be started.
w Press SOUND MODE button during
playback.
The currently selected layer or area is shown on
the display window. (CD or Super Audio CD)
If SOUND MODE button is pressed again, the
playback is stopped, and the layer or area will
be switched to new one.
When you want to listen at that area, press
PLAY button again. The playback will be
started.
9
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet SA8400.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SA8400 | Super Audio CD Player | Marantz |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |