DataSheet.es    


PDF TE250F8 Data sheet ( Hoja de datos )

Número de pieza TE250F8
Descripción DSM Engineering Plastics
Fabricantes DSM 
Logotipo DSM Logotipo



Hay una vista previa y un enlace de descarga de TE250F8 (archivo pdf) en la parte inferior de esta página.


Total 1 Páginas

No Preview Available ! TE250F8 Hoja de datos, Descripción, Manual

DSM Engineering Plastics Property Data
Stanyl® TE250F8
Polyamide 46
40% GF Reinforced, flame retardant
Properties
Physical Properties
Density
Melting Temperature
Thermal Conductivity
Mold Shrinkage(1) MD/TD
Humidity Absorption 23C, 50%RH
Mechancal Properties
Tensile Strength(2)
Tensile Elongation(2)
Tensile Modulus(3)
Charpy Impact Strength(4) 23C
Charpy Impact Strength(4) –40C
Flexural Strength(5)
Flexural Modulus(5)
Thermal Properties
HDT @1.80MPa
Coeff. Linear Thermal Expansion 20C – 80C MD/TD
Electrical Properties
Dielectric Strength
Volume Resistivily
Surface Resistivily
Dielectric Constant 23C, MHz
Dissipation Factor 23C, MHz
Flammability
Typical Data
1740
295
0.24
0.2±0.1 / 0.8±0.3
1.2
180
2
15000
10
10
250
13000
>285
2/8
>30
1015
1016
4.0
16
0.75mm V-0
(1) Measured on plaques (80x80x1mm). Depending on molding conditions.
(2) Test Speed: Reinforced=5mm/min, Non-reinforced=50mm/min
(3) Test Speed: 1mm/min.
(4) Notched, Edgewise
(5) Test Speed: Reinforced=2mm/min, Non-reinforced=10mm/min 2mm/min.
Unit
Kg/cm3
C
W/K m
%
%
MPa
%
MPa
KJ/m2
KJ/m2
MPa
MPa
C
1/K x 10-5
KV/mm
W cm
W
-
X 10-3
-
Test Method
ISO 1183
DSM
DSM
DSM
ISO 1110
ISO 527-1A
ISO 527-1A
ISO 527-1A
ISO 179-1eA
ISO 179-1eA
ISO 178
ISO 178
ISO 75-A
DSM
IEC 243
IEC 93
IEC 93
IEC 250
IEC 250
UL 94
Disclaimer: All information supplied by or on behalf of DSM in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith, believed reliable, but DSM assumes
no liability and makes no warranties of any kind, express or implied, including, but not limited to, those of TITLE, MERCHANCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE or NON-INFRIGEMENT or any warranty
arising from a course of dealing, usage, or trade practice whatsoever in respect of application processing or use made of the aforementioned information or product. The user assumes all responsibility for the use of all
information provided and shall verify quality and other properties or any consequence from the use of all such information.

1 page





PáginasTotal 1 Páginas
PDF Descargar[ Datasheet TE250F8.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TE250F8DSM Engineering PlasticsDSM
DSM
TE250F8StanylDSM
DSM

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar