|
|
Número de pieza | KDC-3026 | |
Descripción | (KDC-xxx) CD Receiver | |
Fabricantes | Keenwood | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de KDC-3026 (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
No Preview Available ! KDC-3026
KDC-2026
KDC-226
KDC-126
KDC-126S
CD-RECEIVER
INSTRUCTION MANUAL
© B64-2671-00 / 00 (MW)
1 page About CDs
Handling CDs
• Don’t touch the recording surface of the CD.
CD cleaning
Clean from the center of the disc and move
outward.
CD storage
• Don’t place them in direct sunlight (On the
seat or dashboard etc.) and where the
temperature is high.
• Store CDs in their cases.
• CD-R and CD-RW are easier to damage than
a normal music CD. Use a CD-R or a CD-RW
after reading the caution items on the
package etc.
• Don’t stick tape etc. on the CD.
Also, don’t use a CD with tape stuck on it.
Removing CDs
When removing CDs from this unit pull them
out horizontally.
CDs that can’t be used
• CDs that aren’t round can’t be used.
When using a new CD
If the CD center hole or outside rim has burrs,
use it after removing them with a ball pen etc.
Burrs
Burrs
• CDs with coloring on the recording surface
or that are dirty can’t be used.
• This unit can only play the CDs with
.
It may not correctly play discs which do not
have the mark.
• A CD-R or CD-RW that hasn’t been finalized
can’t be played. (For the finalization process
refer to your CD-R/CD-RW writing software,
and your CD-R/CD-RW recorder instruction
manual.)
CD accessories
Don’t use disc type accessories.
—5—
5 Page CD/External disc control features
0
LOUD
AME AUTO
AUD
OFF
SRC
4 DISC- DISC+ ¢
CRSC
SCAN
RDM
REP
M.RDM CLK ADJ
SCAN RDM REP M.RDM
SCN RDM
indicator indicator Disc number
Track number
REP indicator IN indicator Track time
Playing CD
When a CD is inserted
Press the [SRC] button.
Select the "CD" display.
When a CD is inserted, the "IN" indicator is ON.
Eject the CD
Press the [0] button.
3 in. (8cm) CD cannot be played. Using an adapter and inserting
them into this unit can cause damage.
Function of the KDC-3026/KDC-2026
Playing External Disc
Playing discs set in the optional accessory disc player connected
to this unit.
Press the [SRC] button.
Select the display for the disc player you want.
Display examples:
Display
Disc player
"CD-2"
"DISC"
CD player
CD changer/ MD changer
• Disc No. 10 is displayed as "0".
• The functions that can be used and the information that can be
displayed will differ depending on the external disc players being
connected.
— 11 —
11 Page |
Páginas | Total 20 Páginas | |
PDF Descargar | [ Datasheet KDC-3026.PDF ] |
Número de pieza | Descripción | Fabricantes |
KDC-3021 | (KDC-xxx) CD Receiver | Kenwood |
KDC-3026 | (KDC-xxx) CD Receiver | Keenwood |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |