|
|
PDF KXTG5050 Data sheet ( Hoja de datos )
| Número de pieza | KXTG5050 | |
| Descripción | Digital Cordless Phone | |
| Fabricantes | Panasonic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de KXTG5050 (archivo pdf) en la parte inferior de esta página. Total 64 Páginas | ||
|
No Preview Available !
.com5.8 GHz Digital Cordless Phone
et4U Operating Instructions
She Model No. KX-TG5050
ta mPulse-or-tone dialing capability
wwwww.D.aDataSheet4eeUt4U..ccoomThe unit is Caller ID compatible. To display the Caller’s name and phone
hnumber, you must subscribe to Caller ID service.
w taSPLEASE READ BEFORE USE AND SAVE.
.DaCharge the battery for 6 hours before initial use.
wPanasonic World Wide Web address: http://www.panasonic.com
wwfor customers in the USA or Puerto Rico
1 page  
Useful Information
Belt Clip . . . . . . . . . . . . . . . . . . . 41
Optional Headset . . . . . . . . . . . 41
Wall Mounting . . . . . . . . . . . . . . 42
Direct Commands . . . . . . . . . . . 45
If the Following Appear on
Your Display... . . . . . . . . . . . . . 47
Troubleshooting . . . . . . . . . . . . 48
openLCR Service
for Caller IQ . . . . . . . . . . . . .51
Turning on or off
Caller IQ Feature . . . . . . . . . . . 51
Downloading Data . . . . . . . . . . 52
Important Safety
Instructions . . . . . . . . . . . . . . . . 55
FCC and Other Information . . . 56
Index . . . . . . . . . . . . . . . . . . . . . 59
Warranty . . . . . . . . . . . . . . . . . . 61
Specifications . . . . . . . . . . . . . . 63
Contents
Important
Throughout these Operating Instructions, Handset and Base Unit are used
to indicate with which unit an operation can be performed.
Handset : Perform with the handset.
Base Unit : Perform with the base unit.
Handset & Base Unit : Perform with the handset and base unit together.
For assistance, please call: 1-800-211-PANA(7262)
5
5 Page 
Installation
Recharge
Recharge the battery when:
— “Recharge battery” is displayed on the handset,
— “3” flashes, or
— the handset beeps intermittently while it is in use.
IN USE SPIPRIVACY3
Recharge battery
• The display will continually indicate “Recharge battery” and/or “3” will
flash when the handset battery is charged for less than 15 minutes and the
handset is lifted off the base unit.
• If the battery has been discharged, the handset will display “Charge for 6 HRS”
and “4” when you place the handset on the base unit. The handset will not
work unless the battery is charged. Continue charging.
Battery replacement:
If you cleaned the charge contacts and fully charged the battery, but after a few
telephone calls, “Recharge battery” is displayed and/or “3” continues to
flash, or “Charge for 6 HRS” and “4” are displayed, the battery may need
to be replaced. Please order a new Panasonic HHR-P104 battery at the
telephone number shown on page 2. To replace the battery, see page 10.
A nickel metal hydride battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for
information on how to recycle this battery.
Battery information
After your Panasonic battery is fully charged, you can expect the following performance:
Operation
Operating time
While in use (TALK)
While not in use (Standby)
While using the Clarity Booster feature (p. 21)
Up to 5 hours
Up to 11 days
Up to 3 hours
• A fully charged battery will give you up to 5 hours of continuous talk time, or keep
your handset in Standby mode to receive incoming calls for up to 11 days (if no
phone calls are made). Battery power is consumed whenever the handset is off of
the base unit, even when the handset is not in use. The longer you leave the
handset off of the base unit, the time you can actually talk on the handset will be
shortened. Actual battery performance depends on a combination of how often
the handset is in TALK mode and how often it is in Standby mode.
• Clean the charge contacts of the handset and the base unit with a soft, dry
cloth once a month. Clean more often if the unit is subject to grease, dust or
high humidity. Otherwise the battery may not charge properly.
• If the battery is fully charged, you do not have to place the handset on the base
unit until “Recharge battery” is displayed and/or “3” flashes. This will
maximize the battery life.
• If you want to keep the battery fully charged at all times, place the handset on the
base unit when the handset is not used. The battery cannot be overcharged.
• When the Clarity Booster feature is turned on automatically or manually, battery
operating time may be shortened (p. 21).
For assistance, please call: 1-800-211-PANA(7262)
11
11 Page | ||
| Páginas | Total 64 Páginas | |
| PDF Descargar | [ Datasheet KXTG5050.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| KXTG5050 | Digital Cordless Phone | Panasonic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |