DataSheet.es    


PDF XG-NV2U Data sheet ( Hoja de datos )

Número de pieza XG-NV2U
Descripción Operation Manual
Fabricantes Sharp 
Logotipo Sharp Logotipo



Hay una vista previa y un enlace de descarga de XG-NV2U (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! XG-NV2U Hoja de datos, Descripción, Manual

Dear SHARP Customer
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color
LCD Projector built for outstanding quality, reliability and performance.
Every SHARP Color LCD Projector is adjusted for a proper picture and has passed through the
most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you have the ability to adjust the picture and color to your personal viewing preference.
We sincerely hope that you will be satisfied with the quality and performance of your Color LCD
Projector for many years to come.
Please read the instructions carefully, and keep them handy for future reference.
IMPORTANT
For your assistance in reporting the loss or
theft of your Color LCD Projector, please
record the Serial Number located on the rear
of the projector and retain this information.
Model No.: XG-NV2U
Serial No.:
Important Information
There are two important reasons for prompt warranty registration of your new SHARP LCD
Projector, using the REGISTRATION CARD packed with the projector.
1. WARRANTY
This is to assure that you immediately receive the full benefit of the parts, service and
labor warranty applicable to your purchase.
2. CONSUMER PRODUCT SAFETY ACT
To ensure that you will promptly receive any safety notification of inspection, modification,
or recall that SHARP may be required to give under the 1972 Consumer Product Safety
Act, PLEASE READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE.
U.S.A. ONLY
WARNING: High brightness light source. Do not stare into the beam of light, or view directly.
Be especially careful that children do not stare directly into the beam of light.
WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT REMOVE SCREWS
EXCEPT SPECIFIED USER
SERVICE SCREW.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk or electric
shock to persons.
The exclamation point within a triangle is
intended to alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
E-1

1 page




XG-NV2U pdf
Location of Controls
FRONT VIEW
Speakers
Zoom ring
Remote sensor
Lens focusing ring
Cooling fan (Intake vent)
Cautions:
• The exhaust vent, the lamp cage cover and adjacent areas may be
extremely hot during projector operation. To prevent injury, do not
touch these areas until they have sufficiently cooled.
• Allow at least 4 ؆ (10 cm) of space between the cooling fan (exhaust
vent) and the other nearest wall or obstruction.
• If the cooling fan becomes obstructed, a protection device will
automatically turn off the projector lamp. This does not indicate a
malfunction. Remove the projector plug from the wall outlet and wait
10 minutes. Then turn on the power by plugging the cord back in.
This will return the projector to its normal mode.
OPERATION PANEL ON TOP OF PROJECTOR
LAMP REPLACEMENT indicator
POWER indicator TEMPERATURE WARNING indicator
POWER ON/OFF button
BLACK SCREEN button
ADJUSTMENT
(ß/©, ƒ/) buttons
ENTER button
POWER
LAMP
TEMP.
ON/OFF
BLACK
SCREEN
MUTE
INPUT SELECT
VOL
MENU
MUTE button
VOLUME UP-
DOWN buttons
INPUT SELECT button
MENU button
ENTER
SIDE AND REAR VIEW
Cooling fan
(Exhaust vent)
Carring handle
COMPUTER RGB COMPUTER RGB INPUT 2 connector (HD-15)
INPUT 1 connector
COMPUTER AUDIO INPUT 1
(HD-15)
(3.5 mm Stereo Minijack)
Security Lock Anchor
COMPUTER RGB
This projector has a Kensington
OUTPUT
Security Standard connector for use
with a Kensington MicroSaver
connector (HD-15)
Security System. Refer to the
information that came with the
system for instructions on how to use
it to secure this model.
VIDEO INPUT 1
COMPOSITE
Video: RCA
Audio: RCA
Note:
• Be sure to use the Computer
Control cable when connecting
the PC CONTROL terminals.
VIDEO INPUT 2
S-Video: 4-pin mini DIN
Audio: RCA
IN 1
COMPUTER RGB
OUT
LR
IN
1
S-VIDEO
VIDEO
LR
AUDIO
IN
2
IN 2
COMPUTER AUDIO
IN 1 IN 2
COMPUTER AUDIO INPUT 2
(3.5 mm Stereo Minijack)
AUDIO WIRED
OUTPUT REMOTE WIRED REMOTE
CONTROL INPUT
1 PC CONTROL 2 (3.5 mm Minijack)
AUDIO OUTPUT
(3.5 mm Stereo Minijack)
OFF ON (VIDEO/COMPUTER RGB)
110-120V/
200-240V~
MAIN POWER
switch
AC INLET
• PC CONTROL 1:
Use the supplied computer control cable when operating the remote
control as a wireless mouse or when controlling the projector from
the RS-232C terminal.
• PC CONTROL 2:
Use the computer control cable (CTANZ0711CE01) (sold separately)
when operating the remote control as a wireless mouse.
Notes:
• RS-232C does not function when connected to PC CONTROL 2.
• See page 15 for connection.
E-5

5 Page





XG-NV2U arduino
Using the Image Invert/Reverse Function
This projector is equipped with an image invert/reverse function. The projected image can be inverted or reversed
by using the MENU button and the ADJUSTMENT ƒ/and ß/© buttons.
On-Screen Display
1
IMAGE ADJ.
BLK SCRN DISP
INPUT DISPLAY
REVERSE
INVERT
[OFF]
[OFF]
[OFF]
[OFF]
:SEL.
:ADJ.
MENU : E N D
1. Press the MENU button.
With the MENU screen displayed, press the AD-
JUSTMENT ƒ/buttons to select “IMAGE ADJ”.
Then press the ENTER button to display the IMAGE
ADJ. screen.
• The last MENU screen selected is indicated for about
30 seconds.
2
.JDA EGAMI
]FFO[
]FFO[
]NO[
]FFO[
PSID NRCS KLB
YALPSID TUPNI
ESREVER
TREVNI
D N E : UNEM
.LES:
.JDA:
2. Reversed Image Mode
In the IMAGE ADJ. menu, press the ADJUSTMENT
ƒ/buttons to select “REVERSE”. Then press the
ADJUSTMENT ß/© buttons to select ON. The
reversed image will appear.
3 3. Inverted Image Mode
In the IMAGE ADJ. menu, press the ADJUSTMENT
ƒ/buttons to select “INVERT”. Then press the
ADJUSTMENT ß/© buttons to select ON. The
inverted image will appear.
4
:ADJ.
MENU : E N D
:SEL.
INVERT
REVERSE
INPUT DISPLAY
BLK SCRN DISP
IMAGE ADJ.
[ON]
[ON]
[OFF]
[OFF]
4. Reversed Inverted Image Mode
In the IMAGE ADJ. menu, set the REVERSE and
INVERT functions to ON. The reversed inverted
image will appear.
5. Press the MENU button anytime to exit
IMAGE ADJ.
How to set up the projector and screen
Cautions: When setting up the projector
• For minimal servicing and to maintain high image quality, SHARP recommends that this projector be installed
in an area free from humidity, dust and cigarette smoke. When the projector is subjected to these environ-
ments, the lens and filter must be cleaned more often. Periodically the filter should be replaced and the pro-
jector should be cleaned internally. As long as the projector is properly maintained in this manner, use in these
environments will not reduce the overall operation life. Please note that all internal cleaning must be performed
by an Authorized Sharp Industrial LCD Products Dealer or Service Center.
• Do not expose to extreme heat or cold.
Operating temperature: 41°F to 104°F (ם5°C to ם40°C)
Storage temperature: מ4°F to 140°F (מ20°C to ם60°C)
• Do not tilt the projector more than 5°.
• Position the screen so that it is not in direct sunlight or room light. Light falling directly onto the screen washes
out colors, making viewing difficult. Close the curtains and dim the lights when using the screen in a bright or
sunny room.
• The best picture will be obtained when the projector is at a 90 degree angle to the screen. Position the projector
and screen as shown.
E-11

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet XG-NV2U.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
XG-NV2EOperation ManualSharp
Sharp
XG-NV2UOperation ManualSharp
Sharp

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar