|
|
Número de pieza | DMF-5020N | |
Descripción | LCD_Module | |
Fabricantes | OPTREX | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de DMF-5020N (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
No Preview Available ! .
LCD aMtodauSle hSpeeceifitc4atiUon
First Edition
Approved by
March 27, 1997
Final Revision
*******
Checked by
Checked by
Prepared by
Production Div.
Quality Assurance Div.
Design Engineering Div.
Production Div.
Type No. DMF-50202N
w w . D o mTable of Contents
w c1. General Specifications .............................................................................2
.2. Electrical Specifications...........................................................................3
3. Optical Specifications ..............................................................................7
U4. I/O Terminal.............................................................................................9
5. Test..........................................................................................................11
46. Appearance Standards............................................................................12
t7. Code System of Production Lot ..........................................................15
8. Type Number .........................................................................................15
e9. Applying Precautions .............................................................................15
10. Handling Precautions .............................................................................16
w w w . D a t a S h e h e e t 4 URev. Date
Revision History
Page
Comment
ataS
.D
w
w
DMF-50202N (AA) No.97-0074
wOPTREX CORPORATION
OPTREX
Page 1/16
1 page 2.4.Timing Chart
CP1
T=0.223ms typ.
CP2
D1 SEG SEG SEG SEG
127 128
1
2
#1 DATA
SEG
127
SEG
128
SEG
1
SEG
2
FLM
CP1
(Reduction)
FLM
(Reduction)
M
64×T
2.5.Comparison of Display and Data
SEG1
#1 D1 D1 D1 D1
TOP VIEW
#64
SEG128
D1 D1
DMF-50202N (AA) No.97-0074
OPTREX CORPORATION
OPTREX
Page 5/16
5 Page 5 . Te s t
No change on display and in operation under the following test condition.
No. Parameter
1 High Temperature Operating
2 Low Temperature Operating
3 High Temperature Storage
4 Low Temperature Storage
5 Damp Proof Test
6 Vibration Test
7 Shock Test
Conditions
50℃±2℃, 96hrs (operation state)
0℃±2℃, 96hrs (operation state)
60℃±2℃, 96hrs
-20℃±2℃, 96hrs
40℃±2℃, 90~95%RH, 96hrs
Total fixed amplitude : 1.5mm
Vibration Frequency : 10~55Hz
One cycle 60 seconds to 3 directions of X, Y, Z for
each 15 minutes
To be measured after dropping from 60cm high on
the concrete surface in packing state.
Notes
3
4
3, 4
3, 4
5
E
B
Dropping method corner dropping
F A corner : once
GD C
Edge dropping
B,C,D edge : once
A
60cm
Face dropping
E,F,G face : once
Concrete Surface
Note 1 : Unless otherwise specified, tests will be conducted under the following condition.
Temperature : 20±5℃
Humidity : 65±5%
Note 2 : Unless otherwise specified, tests will be not conducted under functioning state.
Note 3 : No dew condensation to be observed.
Note 4 : The function test shall be conducted after 4 hours storage at the normal temperature and humidity
after removed from the test chamber.
Note 5 : Vibration test will be conducted to the product itself without putting it in a container.
DMF-50202N (AA) No.97-0074
OPTREX CORPORATION
OPTREX
Page 11/16
11 Page |
Páginas | Total 16 Páginas | |
PDF Descargar | [ Datasheet DMF-5020N.PDF ] |
Número de pieza | Descripción | Fabricantes |
DMF-50202N | LCD Module | Optrex |
DMF-50202NY-LY | LCD Module | Optrex |
DMF-50202NYJ-SLY | LCD Module | Optrex |
DMF-5020N | LCD_Module | OPTREX |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |