|
|
Número de pieza | SF1174B | |
Descripción | SURFACE ACOUSTIC WAVE FILTER | |
Fabricantes | RF Monolithics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SF1174B (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! .com SF1174B®
t4U• Designed for WLAN IF Applications
e• Low Insertion Loss
e 374.00 MHz• 5.0 x 5.0 x 1.7 mm Suface-Mount Case
h• Differential or Single Ended Input and Output
taS SAW Filter• Complies with Directive 2002/95/EC (RoHS) Pb
.DaAbsolute Maximum Ratings
w Rating
wMaximum Incident Power in Passband
wMax. DC voltage between any 2 terminals
Storage Temperature Range
mSuitable for lead-free soldering - Max Soldering Profile
Value
Units
+10 dBm
30 VDC
-40 to +85
°C
260°C for 30 s
SM5050-8
oElectrical Characteristics
.cCharacteristic
Nominal Center Frequency
UPassband
Insertion Loss at fc
Sym
fC
IL
Notes
1
Min Typ Max
374.000
8.7 10.0
Units
MHz
dB
et4Rejection
3 dB Passband
Amplitude Ripple over fc ±7.0 MHz
Group Delay Variation over fc ±7.0
fc -100 to fc -33 MHz
BW3
GDV
1, 2
1, 2, 3
17
45
23 MHz
0.8 1.0 dBP-P
61 100 nsP-P
54
efc -33 to fc -22 MHz
40 53
fc -22 to fc -16.5 MHz
hfc +16.5 to fc +22 MHz
30 40
30 44
dB
fc +22 to fc +43 MHz
35 48
Sfc +43 to fc +100 MHz
40 49
taOperating Temperature Range
TA 1
-10
+85 °C
Differential Input / Output Impedance Match
aCase Style
.DLid Symbolization (YY=year, WW=week, S=shift)
External L-C
SM5050-8 5 X 5 mm Nominal Footprint
447, YYWWS
Electrical Connections
wConnection
Terminals
100 12pf
12pf
pin 2
pin 7
Port 1 Hot
wPort 1 Gnd Return
w mPort 2 Hot
2
3
6
27nH
100 12pf
SAW Filter
TOP VIEW
pin 3
pin 6
27nH
12pf
200
oPort 2 Gnd Return
7
.cCase Ground
All others
RF IC
RF IC
t4UNotes:
figure 1
1. Unless noted otherwise, all specifications apply over the operating temperature
erange with filter soldered to the specified demonstration board with impedance
ematching to 50 Ω and measured with 50 Ω network analyzer.
h2. Unless noted otherwise, all frequency specifications are referenced to the nom-
inal center frequency, fc.
S3. Rejection is measured as attenuation below the minimum IL point in the pass-
taband. Rejection in final user application is dependent on PCB layout and exter-
nal impedance matching design. See Application Note No. 42 for details.
a4. "LRIP" or "L" after the part number indicates "low rate initial production" and
.D"ENG" or "E" indicates "engineering prototypes."
5. The design, manufacturing process, and specifications of this filter are subject
to change.
6. Either Port 1 or Port 2 may be used for either input or output in the design.
However, impedances and impedance matching may vary between Port 1 and
Port 2, so that the filter must always be installed in one direction per the circuit
design.
7. US and international patents may apply.
8. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of
RF Monolithics, Inc.
9. ©Copyright 1999, RF Monolithics Inc.
10. Electrostatic Sensitive Device. Observe precautions for handling.
wwRF Monolithics, Inc. Phone: (972) 233-2903
wRFM Europe
Phone: 44 1963 251383
Fax: (972) 387-8148
Fax: 44 1963 251510
E-mail: [email protected]
http://www.rfm.com
Page 1 of 3
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
SF1174B 532-1174-001 121604 RevA
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet SF1174B.PDF ] |
Número de pieza | Descripción | Fabricantes |
SF1174B | SURFACE ACOUSTIC WAVE FILTER | RF Monolithics |
SF1174D | SURFACE ACOUSTIC WAVE FILTER | RF Monolithics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |