|
|
PDF NTH080C3 Data sheet ( Hoja de datos )
| Número de pieza | NTH080C3 | |
| Descripción | (NTH Series) Crystal Clock Oscillator | |
| Fabricantes | Saronix | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NTH080C3 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
Technical Data
SaRonix
Crystal Clock Oscillator 3.3V, LVCMOS / HCMOS, Tri-State
NTH / NCH Series
ACTUAL SIZE
Description
A crystal controlled, low current, low
jitter and high frequency oscillator with
precise rise and fall times demanded in
networking applications. The tri-state
function on the NTH enables the output
to go high impedance. Device is pack-
aged in a 14 or an 8-pin DIP compatible
resistance welded, all metal grounded
case to reduce EMI. True SMD DIL14
versions for IR reflow are available, se-
lect option "S" in part number builder.
See separate data sheet for SMD package
dimensions.
Applications & Features
• ADSL, DSL
• DS3, ES3, E1, STS-1, T1
• Ethernet Switch, Gigabit Ethernet
• Fibre Channel Controller
• MPEG
• Network Processors
• Voice Over Packet
• 32 Bit Microprocessors
• Tri-State output on NTH
• LVCMOS / HCMOS compatible
• Available up to 106.25 MHz
Frequency Range:
Frequency Stability:
Temperature Range:
Operating:
Storage:
Supply Voltage:
Recommended Operating:
Supply Current:
Output Drive:
HCMOS
Symmetry:
Rise and Fall Times:
Logic 0:
Logic 1:
Load:
Period Jitter RMS:
Mechanical:
Shock:
Solderability:
Terminal Strength:
Vibration:
Solvent Resistance:
Resistance to Soldering Heat:
Environmental:
Gross Leak Test:
Fine Leak Test:
Thermal Shock:
Moisture Resistance:
0.5 MHz to 106.25 MHz
±20, ±25, ±50 or ±100 ppm over all conditions: calibration
tolerance, operating temperature, input voltage change,
load change, 30 day aging, shock and vibration.
0 to +70°C or -40 to +85°C, See Part Numbering Guide
-55 to +125°C
3.3V ±10%
20mA max, 0.5 to 30 MHz
25mA max, 30+ to 50 MHz
30mA max, 50+ to 80 MHz
35mA max, 80+ to 106.25 MHz
45/55% max 0.5 to 70 MHz max
40/60% max @ 50% VDD
4ns max 0.5 to 50 MHz, 20% to 80% VDD
3ns max 50+ to 80 MHz
1.5ns max 80+ to 106.25 MHz
10% VDD max
90% VDD min
50 pF, 0.5 to 50 MHz
30pF, 50+ to 70 MHz
15pF, 70+ to 106.25 MHz
8ps max
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
MIL-STD-883, Method 2004, Conditions A & C
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Condition A, B or C
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 1014, Condition A2
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
Output Waveform
CMOS
Tr Tf
Logic 1
80% VDD
50% VDD
20% VDD
Logic 0
SYMMETRY
DS-159 REV D
SaRonix 141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet NTH080C3.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NTH080C3 | (NTH Series) Crystal Clock Oscillator | Saronix |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |