DataSheet.es    


PDF OM02 Data sheet ( Hoja de datos )

Número de pieza OM02
Descripción Special CCD Cameras
Fabricantes Sinartis 
Logotipo Sinartis Logotipo



Hay una vista previa y un enlace de descarga de OM02 (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! OM02 Hoja de datos, Descripción, Manual

omOM02 HIRES
.cSpecial CCD Cameras
www.DataSheet4Ufor PCB Inspection
Image Processing Technologies
TECHNICAL SPECIFICATIONS
CCD Camera
Sensor:
CCD 1/3”
Standard video: CCIR B/W
Number of pixel: 795 Hor. x 596 Ver.
Scanning System: 625 lines 50 fields/sec
Video out:
1 Volt p-p / 75 Ohm
Shutter:
1/50—1/120.000 automatic
S/N:
52 –60 dB (AGC off)
Iris:
automatic esp.
.comOM02 HIRES CCD camera
In an anodized aluminum block which is vibration
Uresistant and dust protected are mounted a CCD
t4camera, a telecentric objective, a near infrared
illuminator and an optical filter which has a
transmission peak at the illuminator wavelength.
eThe illuminator radiation passes through the filter
but the camera receives only the backscattered
elight from the object of the same wavelength. So,
hthe visible environmental light is cut-off.
The connections for power in and signal out are
made with connectors fixed by screws.
SThe CCD cameras OM02 are designed for the
tainspection and the alignment with high precision
of PCBs (Printed Circuit Boards) during their
manufacturing process (layers stacking, pressing,
acutting, drilling, etc.).
The use of a telecentric optics is very important to
.Dreduce perspective errors and to obtain constant
magnification in spite of the fact that the PCB
changes its distance from the optics, due to the
wchange of thickness of multi-layers.
The CCD cameras OM02 are manufactured with
wthree working areas: Standard 8 x 10.6 (4x 5.3
with zoom 2X active) mm Laser 3.6 x 4.8 (1.8 x
w2.4) mm e BGA 2.3 x 3 (1.1 x 1.5 ) mm.
AGC:
ON /OFF
Optics
Objective:
fixed focus telecentric
Working area :
8 x 10.6 ( 4x5.3 Zoom) mm Standard
3.6 x 4.8 (1.8x2.4 Zoom) mm Laser
2.2 x 2.9 (1.1x1.4 Zoom) mm BGA
Working distance: 41 mm (± 12) Standard
31.5 mm (± 2.5) Laser
43.5 mm (± 1.5) BGA
Material
Black anodized aluminum
Illuminator IR LED
Wavelength:
880 nm
Number of LEDs: 18 in a ring dia. 21 mm
Illum. angle:
20°
Lum. intensity: >20 mW/sr / LED
Dimensions (mm, included connectors)
Standard :
Laser :
BGA :
Power in
128 x 54 x 48
140 x 54 x 48
140 x 54 x 48
+12 Volt – 250 mA
Connectors
DIN SKV 5p M
for power in CCD and LED
for zoom, AGC and mirror on/off signal input
TNC for video out
Being the working areas so small it is possible to
mdetect images with high resolution and to
taSheet4U.coprocess them for micrometric measurements.
Connectors
How to order:
8S0965/S : OM02 Hires Standard
8S0965/L : OM02 Hires Laser
8S0965/B : OM02 Hires BGA
8S0765 : Coax. Cable 5 m BNC-BNC
8S0966 : Power Cable 5 m DIN 5P F -DSUB 9
.DaSinartis S.r.l. via A. Moro 10/b 21012 Cassano Magnago (Va) Italy
wtel. +39-0331-282257 fax +39-0331-202950
wwww.sinartis.it e-mail sinartis@sinartis.it
wTechnical Data Sheet OM02H JAN 2003

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet OM02.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
OM01Optical Mouse SensorETC
ETC
OM02Special CCD CamerasSinartis
Sinartis
OM02Telecamera SpecialSinartis
Sinartis
OM02Optical Mouse SensorETC
ETC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


www.DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar