|
|
PDF G2RL124DC Data sheet ( Hoja de datos )
| Número de pieza | G2RL124DC | |
| Descripción | PCB Relay | |
| Fabricantes | Omron | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de G2RL124DC (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
PCB Relay
G2RL
Next-generation PCB Relay Available in
24 Models
Low profile: 15.7 mm max. in height
Contains no lead inside and features cadmium-free
contacts ensuring environment-friendly use.
Conforms to VDE0435 (VDE approval: C250
insulation grade for flux protection models; B400
insulation grade for fully sealed models), UL508
and CSA22.2.
Meets VDE0700 requirements for household
products according to VDE0110.
Clearance and creepage distance: 10 mm/10 mm.
mRCTracking resistance: CTI>250
o(Both standard and class F type)
.cUL1446 Class F Coil Insulation system available.
High sensitivity: 400 mW
VDE
Ordering Information t4UClassification
Enclosure
ratings
eStandard
taSheClass-F
General-purpose
High-capacity
General-purpose
High-capacity
Flux protection
Fully sealed
Flux protection
Fully sealed
Flux protection
Fully sealed
Flux protection
Fully sealed
SPST-NO
G2RL-1A
G2RL-1A4
G2RL-1A-E
G2RL-1A4-E
G2RL-1A-CF
G2RL-1A4-CF
G2RL-1A-E-CF
G2RL-1A4-E-CF
Contact form
SPDT
DPST-NO
G2RL-1
G2RL-2A
G2RL-14
G2RL-2A4
G2RL-1-E
---
G2RL-14-E
---
G2RL-1-CF
G2RL-2A-CF
G2RL-14-CF
G2RL-2A4-CF
G2RL-1-E-CF ---
G2RL-14-E-CF ---
aNote: When ordering, add the rated coil voltage to the model number.
Example: G2RL-1A 12 VDC
Rated coil voltage
.DModel Number Legend
wG2RL-jjj-j-j
123 4 5
w1. Number of Poles
w1: 1 pole
4. Classification
None: General purpose
DPDT
G2RL-2
G2RL-24
---
---
G2RL-2-CF
G2RL-24-CF
---
---
2: 2 poles
E: High capacity (1 pole)
2. Contact Form
None: jPDT
A: jPST-NO
5. Approved Standards
None: UL, CSA, VDE, UL Class B Insulation
CF: UL, CSA, VDE, UL Class F Insulation
3. Enclosure Ratings
None: Flux protection
4: Fully sealed
4 www.DataSheet4U.com
1 page  
G2RL
G2RL-1-E, G2RL-14-E
* Indicates average
dimensions.
G2RL-2A, G2RL-2A4
* Indicates average
dimensions.
G2RL-2, G2RL-24
* Indicates average
dimensions.
Terminal Arrangement/
Internal Connection
(Bottom View)
1 234
8 765
G2RL
Mounting Holes
(Bottom View)
Eight, 1.3±0.1 dia.
holes
(2.5)
Terminal Arrangement/
Internal Connection
(Bottom View)
1 34
8 65
Mounting Holes
(Bottom View)
Six, 1.3±0.1 dia.
holes
(2.5)
Terminal Arrangement/
Internal Connection
(Bottom View)
1 23 4
8 765
Mounting Holes
(Bottom View)
Eight, 1.3±0.1 dia.
holes
(2.5)
Precautions
Basic Information
Before actually committing any component to a mass-production
situation, OMRON strongly recommends situational testing, in as
close to actual production situations as possible. One reason is to
confirm that the product will still perform as expected after surviving
the many handling and mounting processes involved in mass pro-
duction. Also, even though OMRON relays are individually tested a
number of times, and each meets strict requirements, a certain test-
ing tolerance is permissible. When a high-precision product uses
many components, each depends upon the rated performance
thresholds of the other components. Thus, the overall performance
tolerance may accumulate into undesirable levels. To avoid prob-
lems, always conduct tests under the actual application conditions.
General
To maintain the initial characteristics of a relay, exercise care that it
is not dropped or mishandled. For the same reason, do not remove
the case of the relay; otherwise, the characteristics may degrade.
Avoid using the relay in an atmosphere containing sulfuric acid
(SO2), hydrogen sulfide (H2S), or other corrosive gases. Do not
continuously apply a voltage higher than the rated maximum volt-
age to the relay. Never try to operate the relay at a voltage and a cur-
rent other than those rated.
Do not use the relay at temperatures higher than that specified in the
catalog or data sheet.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. J117-E1-1 In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
C&C Components Division H.Q.
Relay Division
28F, Crystal Tower Bldg.,
1-2-27, Shiromi, Chuo-ku,
Osaka 540-6028 Japan
Tel: (81)6-6949-6125 Fax: (81)6-6949-6134
Printed in Japan
0999-1M (0999)
8
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet G2RL124DC.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| G2RL124DC | PCB Relay | Omron |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |