DataSheet.es    


PDF LD415-xxx Data sheet ( Hoja de datos )

Número de pieza LD415-xxx
Descripción (LD4xx) DC/DC CONVERTER
Fabricantes Wall Industries 
Logotipo Wall Industries Logotipo



Hay una vista previa y un enlace de descarga de LD415-xxx (archivo pdf) en la parte inferior de esta página.


Total 3 Páginas

No Preview Available ! LD415-xxx Hoja de datos, Descripción, Manual

L SERIES
PRODUCT FEATURES
Low Ripple, Regulated, Single and Dual Output
• Up to 7.5Watts Output Power
• High Input/Output Isolation
• Low Output Ripple
• Continuous Short Circuit Protection
• Pi-Input Filter
• Low Profile Package
THE L SERIES FROM WALL INDUSTRIES
The L Series features a low profile package of 2.0 x 2.0 x
0.40” with output power to 7.5watts. This series has excellent
line and load regulation, input filtering, and low output ripple,
as well as low input reflected ripple. Specifications include
high I/O isolation (500VDC), low output ripple (<50mV P-P)
and current limiting/thermal shutdown.
TO 7.5 WATTS
SPECIFICATIONS: L SERIES
All specifications apply @ +25 C ambient unless otherwise
noted.
INPUT SPECIFICATIONS
GENERAL SPECIFICATIONS
Input Voltage Range...............5, 12, 24, 28, 28VDC ±10%
Efficiency...........................................................65% typical
Nominal Input........................................5, 12, 24, 28 VDC
Input Filter......................................................Pi-Input Filter
w OUTPUT SPECIFICATIONS
wOutput Current....................................................see table
wVoltage Tolerance.................................................5% max.
Thermal Shutdownapprox. +100°C case (7.5W units only)
.DLine Regulation .....................................................±0.05%
a....................................................................3 & 5W 0.3%
tLoad Regulation .....................................................±0.5%
aShort Circuit Protection.......................linear current limiting
SRipple/Noise (20MHz BW).................................50mV p-p
heet4Over Voltage Protection.......................................see table
Isolation Voltage (input to output)......................500VDC min.
Isolation Resistance (input to output).................100 MOhms
Switching Frequency.......................................50kHz typical
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature..........................-25 to +85°C (case)
Storage Temperature.....................................-55 to +100°C
Humidity (non-condensing).............................20 - 95% R.H.
PHYSICAL SPECIFICATIONS
Weight......................................................................2.3 oz.
Case Material........................................Black coated metal,
...................................................non-conductive baseplate
Shielding connections....................Six-Sided Shielded case
Due to advances in technology, specifications subject to
change without notice.
7/14/02
1 U.com603 778 2300 . .WWW WALLINDUSTRIES COM

1 page





PáginasTotal 3 Páginas
PDF Descargar[ Datasheet LD415-xxx.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LD415-xxx(LD4xx) DC/DC CONVERTERWall Industries
Wall Industries

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar