DataSheet.es    


PDF QFP44 Data sheet ( Hoja de datos )

Número de pieza QFP44
Descripción TET
Fabricantes iSYSTEM 
Logotipo iSYSTEM Logotipo



Hay una vista previa y un enlace de descarga de QFP44 (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! QFP44 Hoja de datos, Descripción, Manual

_
Adapters
V1.1
QFP44 - TET
Target CPU package: QFP44
Body size: 10 mm x 10 mm
Pitch: 0.8 mm
POD target layout: T_QFP64
Can be used with:
ST72F561 POD
Note that adapter solutions stated in the document can be used only with listed PODs. Disregarding
this warning may result in hardware failure of the target and the emulation system.
h Available Adapter Parts (by ordering code):
IA44TQ-SOLDER
Solder part, which is being soldered to the target.
(Unit: mm)
AB
12 1.325
C
13.0
D
13.0
omRecommended (by TET) PCB footprint size
www.datasheet4u.c© iSYSTEM, April 2005
EKL
2.0 14.65 14.65
1/8

1 page




QFP44 pdf
Fixed Adapter
The IA64P44ST7-TQ part is required to adapt the POD to the target QFP44 package. First, the
IA44TQ-SOLDER is soldered to the target and then the POD is connected via the IA64P44ST7-
FIXED.
h Assembly
While assembling the adapter and connecting the POD to the target, pay attention to pin 1 to prevent
any damages of the hardware, which may result from incorrect assembly.
Step 1: Solder the IA44TQ-SOLDER to the target PCB.
Step 2: Connect the IA64P44ST7-FIXED to the POD.
Step 3: Connect the POD to the target via IA64P44ST7-FIXED.
It is recommended to use plastic posts (if shipped with the POD), to establish adequate mechanical
stability.
Note that some precaution must be taken to the POD adaptation after the POD is connected to the
target. Otherwise, the part soldered down to the target may break off.
© iSYSTEM, April 2005
5/8

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet QFP44.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
QFP44POD Target LayoutiSYSTEM
iSYSTEM
QFP44TETiSYSTEM
iSYSTEM
QFP44LSI AssemblyROHM Semiconductor
ROHM Semiconductor
QFP44SMD Adapter BoardETC
ETC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar