|
|
PDF DF30FC-xxx Data sheet ( Hoja de datos )
| Número de pieza | DF30FC-xxx | |
| Descripción | 0.4mm Pitch / 0.9mm Height / Board-to-board Connectors | |
| Fabricantes | HRS | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DF30FC-xxx (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
0.4 mm Pitch, 0.9 mm Height, Board-to-Board / Board-to-FPC Connectors
DF30 Series
Extremely small size
(0.90)
(4.56)(3.76)
(0.40)
Header
(10.22)
Receptacle
40 positions shown
sOverview
Continuous miniaturization and increased component
density on PCB created demand for extremely low profile
connectors. This series is addition of a new extremely low
profile connectors to Hirose's wide range of high reliability
board-to-board/board-to-FPC connection solutions.
sFeatures
1. Contact reliability
Concentration of the contact's normal forces at the single
point assures good contact wipe and electrical reliability,
while confirming the fully mated condition with a definite
tactile click.
2. Self alignment
Recognizing the difficulties of mating extremely small
connectors in limited spaces the connectors will self align
in horizontal axis within 0.3 mm.
3. Automatic board placement
Packaged on tape-and-reel the plug and headers have
sufficiently large flat areas to allow pick-up with vacuum
nozzles of automatic placement equipment.
4. Variety of contact positions and styles
Available in standard contact positions of: 20, 22, 24, 30,
34, 40, 50, 60, 70 and 80 with and without metal fittings.
Addition of metal fittings does not affect external
dimensionsof the connectors.
mSmaller contact positions are also available.
.co5. Support for continuity test connector
Connectors which have increased insertion and removal
udurability are available for continuity tests. Contact your
t4Hirose sales representative for details.
eesApplications
hCellular phones, PDA's, mobile computers, digital
scameras, digital video cameras, and other devices
tademanding high reliability connections in extremely
www.dalimited spaces.
s Low profile
s Increased mated retention
s High contact reliability
Header
DF30*-*DP-0.4V
0.9mm
Receptacle
DF30*-*DS-0.4V
Protrusion improves mated retention
Self alignment
0.3mm
2004.10
1
1 page  
sHeader (with metal fittings)
A
B
P=0.4
Note 2
Note 2
0.15
C Flat surface
HRS logo
BRecommended PCB mounting pattern
E +0.05
0
D0
-0.05
B ±0.02
P=0.4 ±0.02
1.1
Metal fittings
0.23 ±0.02
Recommended solder paste thickness: 120 µm
[Specification number] -**, (**)
(81): Embossed tape packaging (5,000 pieces per reel)
* Tolerances non- accumulative.
Part Number
CL No.
DF30FB-20DP-0.4V(**) CL684-1129-5-**
DF30FB-22DP-0.4V(**) CL684-1130-4-**
DF30FB-24DP-0.4V(**) CL684-1131-7-**
DF30FB-30DP-0.4V(**) CL684-1132-0-**
DF30FB-34DP-0.4V(**) CL684-1133-2-**
DF30FB-40DP-0.4V(**) CL684-1134-5-**
DF30FB-50DP-0.4V(**) CL684-1135-8-**
DF30FB-60DP-0.4V(**) CL684-1074-5-**
DF30FB-70DP-0.4V(**) CL684-1075-8-**
DF30FB-80DP-0.4V(**) CL684-1136-0-**
Number of contacts
20
22
24
30
34
40
50
60
70
80
A
05.14
05.54
05.94
07.14
07.94
09.14
11.14
13.14
15.14
17.14
B
03.6
04.0
04.4
05.6
06.4
07.6
09.6
11.6
13.6
15.6
Note 1: Order by number of reels.
Note 2: Headers with 24 or fewer contacts positions will not have protruding areas.
Unit: mm
CDE
1.20
04.64
05.44
1.20
05.04
05.84
1.20
05.44
06.24
1.20
06.64
07.44
1.36
07.44
08.24
1.60
08.64
09.44
2.00
10.64
11.44
2.40
12.64
13.44
2.80
14.64
15.44
3.20
16.64
17.44
5
5 Page 
BHandling Precautions when un-mating the connectors
DF30*-*DS-0.4V(81)
DF30*-*DP-0.4V(81)
Fully mated
Receptacle
Header
Lift even one side, keeping both boards parallel to each other.
Fig. A
Fig. B
When handling circumstances prevent the connector from being
kept level during un-mating, one end may be lifted separate as
shown on Fig. A.
However, to utilize this procedure the connector must be mounted
on a sufficiently rigid circuit board.
Any deflection of the board during this operation may result in
damage to the connector or solder joints.
Do not attempt the start of the un-mating of the connectors from one
side (Fig. B).
When removal is from the width orientation as illustrated in the
diagram to the left, damage could be caused to the connector. Do
not perform removal from the width orientation.
11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet DF30FC-xxx.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DF30FC-xxx | 0.4mm Pitch / 0.9mm Height / Board-to-board Connectors | HRS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |