|
|
PDF FPLA544 Data sheet ( Hoja de datos )
| Número de pieza | FPLA544 | |
| Descripción | Crystal Controlled Oscillators | |
| Fabricantes | Connor-Winfield | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de FPLA544 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 581-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT DATA
CRYSTAL CONTROLLED OSCILLATORS
SHEET
SURFACE MOUNT 3.3V LVPECL CLOCK
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Storage Temperature
Supply Voltage
UNITS
(Vcc)
MINIMUM
-40
-0.5
NOMINAL
-
-
MAXIMUM
85
7.0
UNITS
°C
Vdc
TABLE 1.0
NOTE
OPERATING SPECIFICATIONS
PARAMETER
Center Frequency
Total Frequency Tolerance
Operating Temperature Range
Supply Voltage
Supply Current
Jitter (BW=10Hz to 20MHz)
Jitter (BW=12kHz to 20MHz)
(Fo)
(Vcc)
(Icc)
MINIMUM
44.736
-20
0
3.135
-
-
-
NOMINAL
-
-
3.3
-
-
-
MAXIMUM
175
20
70
3.465
60
5
1
UNITS
MHz
ppm
°C
Vdc
mA
pS RMS
pS RMS
TABLE 2.0
NOTE
1
INPUT CHARACTERISTICS
PARAMETER
Disable Input Voltage (High)
Enable Input Voltage (Low)
(Vih)
(Vil)
MINIMUM
2.275
-
NOMINAL
-
-
MAXIMUM
-
1.68
UNITS
Vdc
Vdc
TABLE 3.0
NOTE
2
2
PECL OUTPUT
CHARACTERISTICS
PARAMETER
LOAD
Voltage
(High)
(Low)
Duty Cycle
Rise / Fall Time 20% to 80%
(Voh)
(Vol)
MINIMUM
-
2.275
-
45
-
NOMINAL
-
-
-
50
-
MAXIMUM
50
-
1.68
55
1
UNITS
Ohms
Vdc
Vdc
%
nS
TABLE 4.0
NOTE
3
4
PACKAGE CHARACTERISTICS
Package
TABLE 5.0
Non-hermetic package consisting of an FR4 subst rate with grounded metal
cover.
PROCESS
RECOMMENDATIONS
Solder Reflow
Wash
TABLE 6.0
The component solder used internal to this device has a m elting point of
221°C. The peak temperature inside the device should be less than or equal
to 220°C for a maximum of 10 seconds
Ultrasonic cleaning is not recommended.
Notes
1) Includes initial tolerance, deviation over temperature, s upply and load variations, shock, vibration and 10 years aging.
2) When the oscillator is disabled, the t rue output is in a low state (Vol) and the complementary output is in the high st ate (VoH).
3) Output must be terminated into 50 ohms t o Vcc – 2V or Thevenin equivalent.
4) Duty Cycle measured at 1.977V
FPLA544
DESCRIPTION
The Connor-Winfield
FPLA544 is a fixed frequency,
surface mount Crystal
Controlled Oscillator (XO)
designed for applications
requiring low jitter and a
±20ppm overall stability.
Operating at 3.3V supply
voltage, the FPLA544
provides LVPECL Differential
Outputs with enable/disable
function.
FEATURES
3.3V OPERATION
ENABLE/DISABLE
LVPECL DIFFERENTIAL OUTPUTS
LOW JITTER <1pS RMS
OVERALL FREQUENCY TOLERANCE
±20PPM
SURFACE MOUNT PACKAGE
TAPE AND REEL PACKAGING
ORDERING INFORMATION
FPLA544 - 155.52MHz
CLOCK
SERIES
CENTER
FREQUENCY
DATASHEET #: Ec140
PAGE 1 OF 2
REV: 00
DATE: 8/8/01
Specifications subject to change without notice.
aCopyright 2001 Connor-Winfield all rights reserved.
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet FPLA544.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| FPLA541 | Crystal Controlled Oscillators | Connor-Winfield |
| FPLA542 | Crystal Controlled Oscillators | Connor-Winfield |
| FPLA543 | Crystal Controlled Oscillators | Connor-Winfield |
| FPLA544 | Crystal Controlled Oscillators | Connor-Winfield |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |