DataSheet.es    


PDF ICS9131 Data sheet ( Hoja de datos )

Número de pieza ICS9131
Descripción 32 KhZ Motherboard Frequency Generator
Fabricantes Integrated Circuit Systems 
Logotipo Integrated Circuit Systems Logotipo



Hay una vista previa y un enlace de descarga de ICS9131 (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! ICS9131 Hoja de datos, Descripción, Manual

Integrated
Circuit
Systems, Inc.
ICS9131
32 KhZ Motherboard Frequency Generator
General Description
The ICS9131 offers a tiny footprint solution for generating
a selectable CPU clock from a 32.768 kHz crystal. The device
allows a variety of microprocessors to be clocked by changing
the state of address lines FS0, FS1, and FS2. The ICS9131 is
the ideal solution for replacing high speed oscillators and for
reducing clock speeds to save power in computers. The
device provides smooth, glitch-free frequency transitions so
that the CPU can continue to operate during slow down or
speed up. The rate of frequency change makes the ICS9131
compatible with all 386DX, 386SX, 486DX, 486DXZ, 486SX
and Pentium™ microprocessors.
The ICS9131 is driven from a single 32.768 kHz crystal. The
only external components required are the crystal and a 10M
ohm resistor. The device generates the 14.318 MHz system
clock, eliminating the need for a 14.318 MHz crystal. High-
Performance applications may require high speed clock
termination components.
Features
• Single 32.768 kHz crystal generates system clock and
selectable CPU clock
• Generates CPU clocks from 8 MHz to 100 MHz.
• Operates from 3.3V or 5.0V supply
• Operates up to 66 MHz at 3.3V
• Separate VDD for 32 kHz clock enables it to run from
battery
• STOPCLK feature allows for a glitch-free turn-on and
Pen-turn-off of the CPU clock to static processors
• Output enable tristates outputs
• 16-pin PDIP or SOIC package
• Frequency selects allow for a smooth transition of
the CPUCLK
Pin Configuration
VDD32 Supply
The ICS9131 has a separate power supply for the 32.768 kHz
oscillator circuitry. This allows the 32 kHz clock to run from
a battery or other source while the main power to the chip is
disconnected. The VDD32 supply is guaranteed to operate
down to +2.0V, with the clock consuming less than 10µA at
+3.3V and the main VDD at 0V.
The frequencies and power-down options in the ICS9131 are
mask programmable. Customer specific masks can be made
and prototypes delivered within 6-8 weeks from receipt of
order. ICS also offers standard versions, such as those de-
scribed in this data sheet.
16-Pin DIP or SOIC
Block Diagram
9131 Rev B 052897P
Pentium is a trademark of Intel.

1 page




ICS9131 pdf
ICS9131
Electrical Characteristics at 5V
Operating VDD = +4.5V to +5.5V; TA =0°C to 70°C unless otherwise stated
AC Characteristics
PARAMETER
SYMBOL TEST CONDITIONS
MIN
TYP
MAX
UNITS
Output Frequency, Note 1
fo Clock1
12.0 - 100 MHz
Input Frequency, Note 1
fi
2.0 32
38 kHz
Output Rise time, Note 1
tr 15pF load, 0.8 to 2.0V
- 0.60 1.4 ns
Rise time, Note 1
t 15pF load, 20% to 80% V
r DD
-
1.6 3.0
ns
Output Fall time, Note 1
t 15pF load, 2.0 to 0.8V
f
- 0.50 1.2 ns
Fall time, Note 1
t 15pF load, 80% to 20% V
f DD
-
0.9 2.5
ns
Duty cycle, Note 1
dt 15pF load @1.4V
45 50 55 %
Jitter, 1 sigma from 33-80 MHz,
Note 1
Tjis 10,000 samples
- 50 150 ps
Jitter, Absolute from 33-80 MHz,
Notes 1, 3
Tjabs 10,000 samples
-250 -
250 ps
Jitter, 1 sigma from 16-25 MHz,
Note 1
T 10,000 samples
jis
60 150 ps
Jitter, Absolute from 16-25 MHz,
Note 1, 3
T 10,000 samples
jabs
-600 -
600 ps
Jitter, 1 sigma from 14 to below,
Note 1
Tjis 10,000 samples
- 1 3%
Jitter, Absolute from 14 to below,
Note 1, 3
Tjabs 10,000 samples
- 2 5%
Frequency Transition time, Note 1
Power-up time, Note 1
tft
tpu
2.0 5.0 10.0 ms
3.0 7.5 15 ms
Note 1: Parameter is guaranteed by design and characterization. Not 100% tested in production.
Note 2: With the STOPCLK pin low (active).
Note 3: Absolute Jitter measured as the shortest and longest period difference to the mean period of the sample set.
5

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet ICS9131.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
ICS91305High Performance Communication BufferIntegrated Circuit Systems
Integrated Circuit Systems
ICS91305IHigh Performance Communication BufferIntegrated Circuit Systems
Integrated Circuit Systems
ICS91309High performance Communication BufferIntegrated Circuit Systems
Integrated Circuit Systems
ICS913132 KhZ Motherboard Frequency GeneratorIntegrated Circuit Systems
Integrated Circuit Systems

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar