|
|
Número de pieza | GS82032T | |
Descripción | 64K x 32 / 2M Synchronous Burst SRAM | |
Fabricantes | GSI Technology | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de GS82032T (archivo pdf) en la parte inferior de esta página. Total 23 Páginas | ||
No Preview Available ! Preliminary
GS82032T/Q-150/138/133/117/100/66
TQFP, QFP
Commercial Temp
Industrial Temp
64K x 32
2M Synchronous Burst SRAM
150 MHz–66 MHz
9 ns–18 ns
3.3 V VDD
3.3 V and 2.5 V I/O
Features
• FT pin for user-configurable flow through or pipeline
operation
• Single Cycle Deselect (SCD) operation
• 3.3 V +10%/–5% core power supply
• 2.5 V or 3.3 V I/O supply
• LBO pin for Linear or Interleaved Burst mode
• Internal input resistors on mode pins allow floating mode pins
• Default to Interleaved Pipeline mode
• Byte Write (BW) and/or Global Write (GW) operation
• Common data inputs and data outputs
• Clock Control, registered, address, data, and control
• Internal self-timed write cycle
• Automatic power-down for portable applications
• JEDEC-standard 100-lead TQFP or QFP package
-150 -138 -133 -117 -100 -66 Unit
Pipeline tCycle 6.6 7.25 7.5 8.5 10 12.5 ns
3-1-1-1 tKQ 3.8 4 4 4.5 5 6 ns
IDD 270 245 240 210 180 150 mA
Flow tCycle 10.5 15 15 15 15 20 ns
Through tKQ 9 9.7 10 11 12 18 ns
2-1-1-1 IDD 170 120 120 120 120 95 mA
Functional Description
Applications
The GS82032 is a 2,097,152-bit high performance
synchronous SRAM with a 2-bit burst address counter.
Although of a type originally developed for Level 2 Cache
applications supporting high performance CPUs, the device
now finds application in synchronous SRAM applications
ranging from DSP main store to networking chip set support.
Controls
Addresses, data I/Os, chip enables (E1, E2, E3), address burst
control inputs (ADSP, ADSC, ADV), and write control inputs
(Bx, BW, GW) are synchronous and are controlled by a
positive-edge-triggered clock input (CK). Output enable (G)
and power down control (ZZ) are asynchronous inputs. Burst
cycles can be initiated with either ADSP or ADSC inputs. In
Burst mode, subsequent burst addresses are generated
internally and are controlled by ADV. The burst address
counter may be configured to count in either linear or
interleave order with the Linear Burst Order (LBO) input. The
Burst function need not be used. New addresses can be loaded
on every cycle with no degradation of chip performance.
Flow Through/Pipeline Reads
The function of the Data Output register can be controlled by
the user via the FT mode pin/bump (Pin 14 in the TQFP, Bump
1F in the FP-BGA). Holding the FT mode pin/bump low,
places the RAM in Flow Through mode, causing output data to
bypass the Data Output Register. Holding FT high places the
RAM in Pipeline mode, activating the rising-edge-triggered
Data Output Register.
SCD Pipelined Reads
The GS82032 is an SCD (Single Cycle Deselect) pipelined
synchronous SRAM. DCD (Dual Cycle Deselect) versions are
also available. SCD SRAMs pipeline deselect commands one
stage less than read commands. SCD RAMs begin turning off
their outputs immediately after the deselect command has been
captured in the input registers.
Byte Write and Global Write
Byte write operation is performed by using Byte Write enable
(BW) input combined with one or more individual byte write
signals (Bx). In addition, Global Write (GW) is available for
writing all bytes at one time, regardless of the byte write
control inputs.
Sleep Mode
Low power (Sleep mode) is attained through the assertion
(High) of the ZZ signal, or by stopping the clock (CK).
Memory data is retained during Sleep mode.
Core and Interface Voltages
The GS82032 operates on a 3.3 V power supply and all inputs/
outputs are 3.3 V- and 2.5 V-compatible. Separate output
power (VDDQ) pins are used to decouple output noise from the
internal circuit.
Rev: 1.04 2/2001
1/23
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
ByteSafe is a Trademark of Giga Semiconductor, Inc. (GSI Technology).
© 2000, Giga Semiconductor, Inc.
1 page Preliminary
GS82032T/Q-150/138/133/117/100/66
Mode Pin Functions
Mode Name
Pin
Name
State
Function
Burst Order Control
LBO
L
H or NC
Linear Burst
Interleaved Burst
Output Register Control
FT
L
H or NC
Flow Through
Pipeline
Power Down Control
L or NC
ZZ H
Active
Standby, IDD = ISB
Note:
There are pull-up devices on LBO and FT pins and a pull down device on the ZZ pin, so those input pins can be
unconnected and the chip will operate in the default states as specified in the above tables.
Burst Counter Sequences
Linear Burst Sequence
Interleaved Burst Sequence
A[1:0] A[1:0] A[1:0] A[1:0]
A[1:0] A[1:0] A[1:0] A[1:0]
1st address
00 01 10 11
1st address
00 01 10 11
2nd address
01 10 11 00
2nd address
01 00 11 10
3rd address
10 11 00 01
3rd address
10 11 00 01
4th address
11 00 01 10
Note: The burst counter wraps to initial state on the 5th clock.
4th address
11 10 01 00
Note: The burst counter wraps to initial state on the 5th clock.
Byte Write Truth Table
Function
GW BW
BA
BB
BC
BD Notes
Read H H X X X X 1
Read H L H H H H 1
Write byte A
H
L
L
H
H
H 2, 3
Write byte B
H
L
H
L
H
H 2, 3
Write byte C
H
L
H
H
L
H 2, 3, 4
Write byte D
H
L
H
H
H
L 2, 3, 4
Write all bytes
H
L
L
L
L
L 2, 3, 4
Write all bytes
L
X
X
X
X
X
Notes:
1. All byte outputs are active in read cycles regardless of the state of Byte Write Enable inputs.
2. Byte Write Enable inputs BA, BB, BC, and/or BD may be used in any combination with BW to write single or multiple bytes.
3. All byte I/Os remain High-Z during all write operations regardless of the state of Byte Write Enable inputs.
Rev: 1.04 2/2001
5/23 © 2000, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
5 Page Preliminary
GS82032T/Q-150/138/133/117/100/66
AC Test Conditions
Parameter
Conditions
Input high level
Input low level
Input slew rate
Input reference level
Output reference level
Output load
2. 3V
0.2 V
1 V/ns
1.25 V
1.25 V
Fig. 1& 2
Notes:
1. Include scope and jig capacitance.
2. Test conditions as specified with output loading as shown in Fig. 1 unless otherwise noted.
3. Output Load 2 for tLZ, tHZ, tOLZ and tOHZ.
4. Device is deselected as defined by the Truth Table.
Output Load 1
DQ
Output Load 2
2.5 V
50Ω 30pF*
DQ 225Ω
VT = 1.25 V
* Distributed Test Jig Capacitance
5pF* 225Ω
DC Electrical Characteristics
Parameter
Input Leakage Current
(except mode pins)
ZZ Input Current
Symbol
IIL
IINZZ
Mode Pin Input Current
IINM
Output Leakage Current
Output High Voltage
Output High Voltage
Output Low Voltage
IOL
VOH
VOH
VOL
Test Conditions
VIN = 0 to VDD
VDD ≥ VIN ≥ VIH
0 V ≤ VIN ≤ VIH
VDD ≥ VIN ≥ VIL
0 V ≤ VIN ≤ VIL
Output Disable,
VOUT = 0 to VDD
IOH = –4 mA, VDDQ = 2.375 V
IOH = –4 mA, VDDQ = 3.135 V
IOL = 4 mA
Min
–1 uA
–1 uA
–1 uA
–300 uA
–1 uA
–1 uA
1.7 V
2.4 V
Max
1 uA
1 uA
300 uA
1 uA
1 uA
1 uA
0.4 V
Rev: 1.04 2/2001
11/23
© 2000, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
11 Page |
Páginas | Total 23 Páginas | |
PDF Descargar | [ Datasheet GS82032T.PDF ] |
Número de pieza | Descripción | Fabricantes |
GS82032 | 64K x 32 2M Synchronous Burst SRAM | ETC |
GS82032A | 64K x 32 / 2M Synchronous Burst SRAM | GSI Technology |
GS82032T | 64K x 32 / 2M Synchronous Burst SRAM | GSI Technology |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |