DataSheet.es    


PDF TA8429H Data sheet ( Hoja de datos )

Número de pieza TA8429H
Descripción Full-bridge Driver (H-Switch)
Fabricantes Toshiba Semiconductor 
Logotipo Toshiba Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de TA8429H (archivo pdf) en la parte inferior de esta página.


Total 14 Páginas

No Preview Available ! TA8429H Hoja de datos, Descripción, Manual

TA8429H/HQ
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA8429H, TA8429HQ
Full-bridge Driver (H-Switch) for DC Motor
(Driver for Switching between Forward and Reverse Rotation)
The TA8429H/HQ is a full-bridge driver IC for brush motor
rotation control. Four operating modes are selectable from
forward, reverse, stop and brake.
The TA8429H/HQ is best suited to drive medium-sized DC and
bipolar stepping motors.
Since the motor drive section and control section have separate
power supply pins, the TA8429H/HQ also allows servo control.
Features
Weight : 4.04 g (typ.)
z Output current of up to 3.0 A (AVE.) and 4.5 A (PEAK)
z Four different modes (forward rotation, reverse rotation, stop, and brake) are supported.
A counter-electromotive force absorber diode is also incorporated.
z Stand-by mode available: IST 100 μA
z Built-in thermal shutdown and short circuit protection circuits
z HZIP power package sealed
z Wide range of operating voltage: VCC = 7 to 27 V
VS = 0 to 27 V
*Please consider the internal loss (Vsat) to operate the IC though minimum VS
is defined zero.
Terminals of TA8429 written below are sensitive to electrostatic discharge. When handling this product, ensure that
the environment is protected against electrostatic discharge by using an earth strap, a conductive mat and an
ionizer. Ensure also that the ambient temperature and relative humidity are maintained at reasonable levels.
Terminals which are sensitive to electrostatic discharge: No. 1, 2, and 12.
The IC should be installed correctly. Otherwise, the IC or peripheral parts and devices may be degraded or
permanently damaged.
The TA8429HQ is a Sn-plated product. (The Pb-containing
materials with a high melting point that are exempted from RoHS
directives are used inside the IC.)
The following conditions apply to solderability:
*Solderability
1. Use of Sn-37Pb solder bath
*solder bath temperature = 230°C
*dipping time = 5 seconds
*number of times = once
*use of R-type flux
2. Use of Sn-3.0Ag-0.5Cu solder bath
*solder bath temperature = 245°C
*dipping time = 5 seconds
*the number of times = once
*use of R-type flux
1
2010-02-23

1 page




TA8429H pdf
Internal Circuit
TA8429H/HQ
Function
IN1
H
L
H
L
H/L
Input
IN2
H
H
L
L
H/L
Output
Mode
ST
OUT1
OUT2
Motor
H L L Short brake
H L H CCW (CW)
H H L CW (CCW)
H
OFF (high impedance)
Stop
L
OFF (high impedance)
Stand-by
5 2010-02-23

5 Page





TA8429H arduino
Package Dimensions
TA8429H/HQ
Weight: 4.04 g (typ.)
11 2010-02-23

11 Page







PáginasTotal 14 Páginas
PDF Descargar[ Datasheet TA8429H.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TA8429HFull-bridge Driver (H-Switch)Toshiba Semiconductor
Toshiba Semiconductor
TA8429HQFull-bridge Driver (H-Switch)Toshiba Semiconductor
Toshiba Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar