|
|
PDF TA4103F Data sheet ( Hoja de datos )
| Número de pieza | TA4103F | |
| Descripción | 1.9GHz BAND UP CONVERTER APPLICATION | |
| Fabricantes | Toshiba Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TA4103F (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA4103F
1.9 GHz Band Up Converter Application
Features
l Built in Lo and IF buffer amplifiers.
l Double balanced MIX circuit
l High conversion gain: GC = 3dB (typ.)
l Recommended operating voltage: VCC = 2.7~3.3 V
Pin Assignment (top view) Marking
TA4103F
Weight: 0.02 g (typ.)
Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
Supply voltage
VCC
5V
Total power dissipation
PD (Note1)
300
mW
Operating temperature
Topr
−40~85
°C
Storage temperature range
Tstg
−55~125
°C
Note 1: When mounted on the glass epoxy board of 2.5 cm2 × 1.6 t
000707EBA1
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the
buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and
to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or
damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the
most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling
Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy
control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control
instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document
shall be made at the customer’s own risk.
· The products described in this document are subject to the foreign exchange and foreign trade laws.
· The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its
use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or
others.
· The information contained herein is subject to change without notice.
2000-12-18 1/4
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet TA4103F.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TA4103F | 1.9GHz BAND UP CONVERTER APPLICATION | Toshiba Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |