DataSheet.es    


PDF DS1005 Data sheet ( Hoja de datos )

Número de pieza DS1005
Descripción 5-Tap Silicon Delay Line
Fabricantes Dallas Semiconducotr 
Logotipo Dallas Semiconducotr Logotipo



Hay una vista previa y un enlace de descarga de DS1005 (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! DS1005 Hoja de datos, Descripción, Manual

www.dalsemi.com
DS1005
5-Tap Silicon Delay Line
FEATURES
All-silicon time delay
5 taps equally spaced
Delay tolerance ±2 ns or ±3%, whichever is
greater
Stable and precise over temperature and
voltage range
Leading and trailing edge accuracy
Economical
Auto-insertable, low profile
Standard 14-pin DIP, 8-pin DIP, or 16-pin
SOIC
Tape and reel available for surface-mount
Low-power CMOS
TTL/CMOS compatible
Vapor phase, IR and wave solderability
Custom delays available
Quick turn prototypes
Extended temperature range available
PIN ASSIGNMENT
IN 1
NC 2
14 VCC
13 NC
IN 1
NC 2
16 VCC
15 NC
NC 3
12 TAP 1
NC 3
14 NC
TAP 2
NC
TAP 4
4
5
6
11 NC
TAP 2 4
10 TAP 3
NC 5
9 NC
TAP 4 6
13 TAP 1
12 NC
11 TAP 3
GND 7
8 TAP 5
DS1005 14-Pin DIP (300-mil)
See Mech. Drawings Section
NC 7
10 NC
GND 8
9 TAP 5
DS1005S 16-Pin SOIC
(300-mil)
See Mech. Drawings Section
IN
TAP 2
TAP 4
GND
1
2
3
4
8 VCC
7 TAP 1
6 TAP 3
5 TAP 5
DS1005M 8-Pin DIP (300-mil)
See Mech. Drawings Section
PIN DESCRIPTION
TAP 1-TAP 5 - TAP Output Number
VCC
GND
- +5 Volts
- Ground
NC - No Connection
IN - Input
DESCRIPTION
The DS1005 5-Tap Silicon Delay Line provides five equally spaced taps with delays ranging from 12 ns
to 250 ns, with an accuracy of ±2 ns or ±3%, whichever is greater. This device is offered in a standard 14-
pin DIP, making it compatible with existing delay line products. Space-saving 8-pin DIPs and 16-pin
SOICs are also available. Both enhanced performance and superior reliability over hybrid technology is
achieved by the combination of a 100% silicon delay line and industry standard DIP and SOIC
packaging. In order to maintain complete pin compatibility, DIP packages are available with hybrid lead
configurations. The DS1005 reproduces the input logic level at each tap after the fixed delay specified by
the dash number in Table 1. The device is designed with both leading and trailing edge accuracy. Each
tap is capable of driving up to ten 74LS loads. Dallas Semiconductor can customize standard products to
meet special needs. For special requests and rapid delivery, call (972) 371–4348.
1 of 6
111799

1 page




DS1005 pdf
DS1005
TEST SETUP DESCRIPTION
Figure 3 illustrates the hardware configuration used for measuring the timing parameters on the DS1005.
The input waveform is produced by a precision pulse generator under software control. Time delays are
measured by a time interval counter (20 ps resolution) connected between the input and each tap. Each
tap is selected and connected to the counter by a VHF switch control unit. All measurements are fully
automated, with each instrument controlled by a central computer over an IEEE 488 bus.
TEST CONDITIONS
INPUT:
Ambient Temperature
Supply Voltage (VCC)
Input Pulse
25°C ±=3°C
5.0V ±=0.1V
High = 3.0V ±=0.1V
Low = 0.0V ±=0.1V
Source Impedance
Rise and Fall Time
Pulse Width
Period
50 ohm maximum
3.0 ns maximum
500 ns
1 µs
OUTPUT:
Each output is loaded with the equivalent of a 74F04 input gate. Delay is measured at the 1.5V level on
the rising and falling edge.
NOTE:
Above conditions are for test only and do not restrict the operation of the device under other data sheet
conditions.
5 of 6

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet DS1005.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
DS10005-Tap Silicon Delay LineDallas Semiconducotr
Dallas Semiconducotr
DS10034-Tap Silicon Delay Line for RISC ApplicationsDallas Semiconductor
Dallas Semiconductor
DS10045-Tap High Speed Silicon Delay LineDallas Semiconducotr
Dallas Semiconducotr
DS10055-Tap Silicon Delay LineDallas Semiconducotr
Dallas Semiconducotr

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar