DataSheet.es    


PDF B6B-PH-SM3-TB Data sheet ( Hoja de datos )

Número de pieza B6B-PH-SM3-TB
Descripción Disconnectable Crimp Style Connectors
Fabricantes JST 
Logotipo JST Logotipo



Hay una vista previa y un enlace de descarga de B6B-PH-SM3-TB (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! B6B-PH-SM3-TB Hoja de datos, Descripción, Manual

Crimp
2.0mm
(.079") pitch
PH CONNECTOR
Disconnectable Crimp style connectors
Emboss Tape
This is a thin, low-profile 2.0mm (.079")
pitch connector 7.5mm (.295") in height
after mounting and 4.5mm (.177") in width.
It is designed to meet the demand for
high-density connection of internal wires
to printed circuit boards. It is compact,
highly reliable and low in cost.
16
Features –––––––––––––––––––––––
Reliable contact
The contact has long dimples near the center to ensure a good
connection at all times, even under conditions of vibration and
mechanical abuse, and when used with low voltage and low
current circuits.
Easy and effective crimping
Although the contact is compact, it has a long wire strip
holding length of 2.6 +/- 0.4mm (.102" +/-.016"). This long
length simplifies automatic crimping and the crimping of
shielded wires.
Fully shrouded header
The fully shrouded header has walls on all four sides to
prevent improper connection to the mating housing and to
prevent the instruction of flux and other contaminants.
High solderable square post
The square post is copper-undercoated and tin/lead-plated for
superior solderability and for whisker prevention.
Printed circuit board retention mechanism
The solder side of the header has a retention mechanism that
prevents it from floating during soldering. As a result, the
header can be positioned accurately.
Compatible with the KR insulation
displacement connector
The same shrouded header can be used for either PH crimp-
style connector or KR insulation displacement connector. This
allows both types of connector to be used interchangeably
without replacing the header.
Surface mount model (SMT)
This connector is also available in a surface mount
configuration. Its housing is made of heat resistant resin so
that it is not adversely affected during reflow soldering.
Because of its tiny size and ability to be surface mounted, this
connector meets the demand for high-density mounting of
components inside electronic products.
Specifications ––––––––––––––––––
Current rating: 2A AC, DC (AWG #24)
Voltage rating: 100V AC, DC
Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m max.
After environmental testing/20m max.
• Insulation resistance: 1,000M min.
• Withstanding voltage: 800V AC/minute
• Applicable wire: AWG #32 to #24
• Applicable PC board thickness: 0.8 to 1.6mm(.031" to .063")
* Contact JST for details
Standards –––––––––––––––––––––
0Recognized E60389
1Certified LR20812
2R75087

1 page




B6B-PH-SM3-TB pdf
PH CONNECTOR
Taping specifications of SM3 type shrouded headers –––––––––––––––––––––––––––
Feeding direction
[13.0(.512)dia.]
W1 + 2.5
- 1.0
(W1 )+.098
- .039
2.0 ± 0.5
(.079 ± .020)
Carrier tape
Feeding direction
Cover tape leader area
Tail tape
40.0
(1.575)min.
Connector
loaded area
150.0
(5.906)min.
Lead tape
20 vacancies min.
Top entry type
(2 to 6 circuits)
Feeding direction
1.55±0.05
(.061±.002)dia.
4.0±0.1
(.157±.004)
2.0±0.1
(.079±.004)
0.38±0.05
(.015±.002)
Cover tape
Top entry type
(7 to 14 circuits)
Feeding direction
1.55±0.05
(.061±.002)dia.
4.0±0.1
(.157±.004)
2.0±0.1
(.079±.004)
0.38±0.05
(.015±.002)
Cover tape
12.0±0.1
(.472±.004)
Side entry type
(2 to 6 circuits)
Feeding direction
1.55±0.05
(.061±.002)dia.
4.0±0.1
(.157±.004)
2.0±0.1
(.079±.004)
Carrier tape
0.38±0.05
(.015±.002)
Cover tape
12.0±0.1
(.472±.004)
Side entry type
(7 to 14 circuits)
Feeding direction
1.55±0.05
(.061±.002)dia.
4.0±0.1
(.157±.004)
2.0±0.1
(.079±.004)
Carrier tape
0.38±0.05
(.015±.002)
Cover tape
12.0±0.1
(.472±.004)
Carrier tape
Circuits
2 to 3
Top entry
type
4 to 6
7 to 9
10 to 14
2 to 3
Side entry
type
4 to 6
7 to 9
10 to 14
Taping dimensions mm(in.)
Reel dimensions
mm(in.)
F S W W1
7.5(.295) 16.0( .630) 17.5( .689)
11.5(.453) 24.0( .945) 25.5(1.004)
14.2(.559) 28.4(1.118) 32.0(1.260) 33.5(1.319)
20.2(.795) 40.4(1.591) 44.0(1.732) 45.5(1.791)
7.5(.295) 16.0( .630) 17.5( .689)
11.5(.453) 24.0( .945) 25.5(1.004)
14.2(.559) 28.4(1.118) 32.0(1.260) 33.5(1.319)
20.2(.795) 40.4(1.591) 44.0(1.732) 45.5(1.791)
Q'ty /
reel
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
20 Material and Finish
12.0±0.1
(.472±.004)
Carrier tape
Note:
1. Specifications conform to JIS C 0806. The tape width, connector
loading recess square hole dimensions, etc. are determined by the
number of circuits and external shape of the connector to be loaded.
2. Specifications are subject to change without prior notice.

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet B6B-PH-SM3-TB.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
B6B-PH-SM3-TBDisconnectable Crimp Style ConnectorsJST
JST

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar