DataSheet.es    


PDF DG2 Data sheet ( Hoja de datos )

Número de pieza DG2
Descripción MINIATURE CLAMPER / DAMPER GLASS PASSIVATED RECTIFIER
Fabricantes General 
Logotipo General Logotipo



Hay una vista previa y un enlace de descarga de DG2 (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! DG2 Hoja de datos, Descripción, Manual

CG2 AND DG2
MINIATURE CLAMPER / DAMPER GLASS PASSIVATED RECTIFIER
Reverse Voltage - 1400 to 1500 Volts Forward Current - 2.0 Amperes
DO-204AP
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
0.150 (3.8)
0.100 (2.5)
DIA.
0.240 (6.1)
MAX.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
*Braised-lead assembly is covered by Patent No. 3,930,306
FEATURES
Specially designed for clamping circuits in horizontal
deflection systems and damper applications
High temperature metallurgically bonded construction
Glass passivated cavity-free junction
2.0 Ampere operation
at TA=50°C with no thermal runaway
Typical IR less than 0.1µA
Hermetically sealed package
Capable of meeting environmental standards of
MIL-S-19500
High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AP solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.02 ounce, 0.56 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375” (9.5mm) lead length at TA=50°C
Peak forward surge current 8.3ms single half sine
-wave superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 2.0A
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=100°C
Maximum full load reverse current full cycle
average 0.375” (9.5mm) lead length at TA=100°C
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
SYMBOLS
VRRM
VRMS
VDC
I(AV)
IFSM
VF
IR
IR(AV)
trr
CJ
RΘJA
TJ, TSTG
CG2
1400
980
1400
2.0
DG2
1500
1050
1500
40.0
1.1
5.0
100.0
200.0
15.0 20.0
15.0
55.0
-65 to +175
UNITS
Volts
Volts
Volts
Amps
Amps
Volts
µA
µA
µs
pF
°C/W
°C
NOTES:
(1) Measured with IF=0.5A, IR=50mA
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted
4/98

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet DG2.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
DG-105Photointerrupters(Reflective)KODENSHI KOREA CORP
KODENSHI KOREA CORP
DG-112Photointerrupters(Reflective)KODENSHI KOREA CORP
KODENSHI KOREA CORP
DG-12864128 x 64 Dot 1/64 Duty STNExcel Technology
Excel Technology
DG-12864-11128 x 64 Dot 1/64 Duty STNExcel Technology
Excel Technology

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar