|
|
PDF DFA20E12S Data sheet ( Hoja de datos )
| Número de pieza | DFA20E12S | |
| Descripción | SINGLE OUTPUT | |
| Fabricantes | Power-One | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DFA20E12S (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
DFA20 SERIES
SINGLE OUTPUT
DESCRIPTION
The compact DFA20 Series provides power densities up to 11 watts
per cubic inch (0.67 watts per cm3). Ideal for battery operated
industrial, medical control and remote data collection systems, this
converter has fully filtered inputs and outputs. Complete overload
protection with independent pulse-by-pulse current limiting and an
overtemperature shutdown ensures reliable system operation. The
output of the converter is electrically isolated, thereby allowing the
output to be configured as a positive or negative output voltage.
FEATURES
• Remote ON/OFF and TRIM
• Overcurrent Protection and Thermal Shutdown
• Efficiencies to 83%
• 700V Isolation, Up to 1544V on 48V Converters
• Power Density up to 11 Watts per Cubic Inch
• Five-Side Shielded Case
• Extended Range Input (2:1)
BOTTOM VIEW
2.02
(51.31)
SIDE VIEW
0.040 (1.02) DIA
6 PLACES
0.700
(17.78)
0.600
(15.24)
0.400
(10.16)
0.300
(7.62)
0.000
0.100
(2.54)
0.51
(13.0)
1
2
3
5
2.02
(51.31)
6
7
Mechanical tolerances unless otherwise noted:
X.XX dimensions: ±0.020 inches
X.XXX dimensions: ±0.005 inches
NOTES
(1) All parameters measured at Tc = 25°C, nominal input voltage and full rated load unless otherwise noted.
Refer to the Technical Reference Section for the definition of terms, measurement circuits and other
information.
(2) The Case is tied to the -Input, Pin 2.
(3) The functional temperature range is intended to give an additional data point for use in evaluating this
power supply. At the low functional temperature the power supply will function with no side effects,
however, sustained operation at the high functional temperature will reduce expected operational life.
The data sheet specifications are not guaranteed beyond the case operating range.
(4) The case thermal impedance is specified as the case temperature rise over ambient per package watt
dissipated.
Rev. 04/2000
1
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet DFA20E12S.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DFA20E12D | DUAL OUTPUT | Power-One |
| DFA20E12D12 | DUAL OUTPUT | Power-One |
| DFA20E12D15 | DUAL OUTPUT | Power-One |
| DFA20E12D5 | DUAL OUTPUT | Power-One |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |