|
|
PDF SE555C Data sheet ( Hoja de datos )
| Número de pieza | SE555C | |
| Descripción | Timer | |
| Fabricantes | Philips | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SE555C (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
INTEGRATED CIRCUITS
NE/SA/SE555/SE555C
Timer
Product data
Supersedes data of 1994 Aug 31
Philips
Semiconductors
2003 Feb 14
1 page  
Philips Semiconductors
Timer
Product data
NE/SA/SE555/SE555C
TYPICAL PERFORMANCE CHARACTERISTICS
Minimum Pulse Width
Required for Triggering
150
Supply Current
vs Supply Voltage
10.0
125
–55 °C
100
0 °C
75
+25 °C
50 +70 °C
8.0 +125 °C
+25 °C
6.0
–55 °C
4.0
25 +125 °C
0
0 0.1 0.2 0.3 0.4 (×VCC)
LOWEST VOLTAGE LEVEL OF TRIGGER PULSE
2.0
0
5.0
10.0
15.0
SUPPLY VOLTAGE – VOLTS
Low Output Voltage
vs Output Sink Current
10
VCC = 5 V
1.0 –55 °C
+25 °C
+25 °C
0.1
Low Output Voltage
vs Output Sink Current
10
VCC = 10 V
1.0 –55 °C
+25 °C
+25 °C
+25 °C
0.1
+25 °C
–55 °C
1.015
Delay Time
vs Temperature
1.010
1.005
1.000
0.995
0.990
0.985
-50 -25 0 +25 +50 +75 +100 +125
TEMPERATURE – °C
Low Output Voltage
vs Output Sink Current
10
VCC = 15 V
1.0
–55 °C
0.1 +25 °C
+25 °C
–55 °C
0.001
1.0 2.0
5.0 10 20
ISINK – mA
50 100
High Output Voltage Drop
vs Output Source Current
2.0
1.8 –55 °C
1.6
+25 °C
1.4
1.2
+125 °C
1.0
0.8
0.6
0.4
0.2 5 V ≤ VCC ≤ 15 V
0
1.0 2.0
5.0 10 20
50 100
ISOURCE – mA
0.01
1.0 2.0
5.0 10 20 50 100
ISINK – mA
Delay Time
vs Supply Voltage
1.015
1.010
1.005
1.000
0.995
0.990
0.985
0
5 10 15
SUPPLY VOLTAGE – V
20
Figure 4. Typical Performance Characteristics
0.01
1.0 2.0
5.0 10 20 50 100
ISINK – mA
Propagation Delay vs Voltage
Level of Trigger Pulse
300
250
–55 °C
200
0 °C
150
100
50
0
0
+25 °C
+70 °C
+25 °C
0.1 0.2 0.3 0.4
LOWEST VOLTAGE LEVEL
OF TRIGGER PULSE – ×VCC
SL00352
2003 Feb 14
5
5 Page 
Philips Semiconductors
Timer
Product data
NE/SA/SE555/SE555C
Data sheet status
Level
Data sheet status [1]
Product
status [2] [3]
I Objective data
Development
Definitions
This data sheet contains data from the objective specification for product development.
Philips Semiconductors reserves the right to change the specification in any manner without notice.
II Preliminary data
Qualification
This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
III Product data
Production
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL
http://www.semiconductors.philips.com.
[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given
in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no
representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be
expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree
to fully indemnify Philips Semiconductors for any damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to make changes in the products—including circuits, standard cells, and/or software—described
or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated
via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys
no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent,
copyright, or mask work right infringement, unless otherwise specified.
Contact information
For additional information please visit
http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
For sales offices addresses send e-mail to:
© Koninklijke Philips Electronics N.V. 2003
All rights reserved. Printed in U.S.A.
Document order number:
Date of release: 02-03
9397 750 11129
Philips
Semiconductors
2003 Feb 14
11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet SE555C.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SE555 | xx555 Precision Timers (Rev. I) |  Texas Instruments |
| SE555 | Precision Timer | Philips |
| SE555 | GENERAL PURPOSE SINGLE BIPOLAR TIMERS |  STMicroelectronics |
| SE555-SP | QML CLASS V PRECISION TIMER | Texas Instruments |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |