DataSheet.es    


PDF P4KA36 Data sheet ( Hoja de datos )

Número de pieza P4KA36
Descripción AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR
Fabricantes General Semiconductor 
Logotipo General Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de P4KA36 (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! P4KA36 Hoja de datos, Descripción, Manual

P4KA6.8 THRU P4KA43A
AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 6.8 to 43 Volts Peak Pulse Power - 400 Watts
DO-204AL
0.107 (2.7)
0.080 (2.0)
DIA.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
NOTE: Lead diameter is 0.026 (0.66) for suffix "E" part numbers
0.023 (0.58)
Dimensions in inches and (millimeters)
* Patent #’s 4,980,315
5,166,769
5,278,094
Available in unidirectional only
FEATURES
Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
Designed for under the hood applications
Exclusive patented PAR™ oxide passivated
chip construction
400W peak pulse power
capability with a 10/1000µs waveform,
repetition rate (duty cycle): 0.01%
Excellent clamping capability
Low incremental surge resistance
Fast response time: typically less
than 1.0ps from 0 Volts to V(BR)
For devices with V(BR)10V, ID are typically less than
1.0µA
High temperature soldering guaranteed:
300°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3 kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AL molded plastic body over
passivated junction
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes positive end (cathode)
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Peak pulse power dissipation with a 10/1000µs
waveform (NOTE 1, FIG. 1)
Peak pulse current with a 10/1000µs waveform
(NOTE 1, FIG. 3)
Steady state power dissipation at TL=75°C
lead lengths 0.375" (9.5mm) (NOTE 2)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
(JEDEC Method) (NOTE 3)
Maximum instantaneous forward voltage at 25A
Operating junction and storage temperature range
SYMBOL
PPPM
IPPM
PM(AV)
IFSM
VF
TJ, TSTG
VALUE
Minimum 400
SEE TABLE 1
1.0
40.0
3.5
-65 to +185
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5
8/6/98
UNITS
Watts
Amps
Watts
Amps
Volts
°C

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet P4KA36.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
P4KA30AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSORGeneral Semiconductor
General Semiconductor
P4KA30AAUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSORGeneral Semiconductor
General Semiconductor
P4KA33AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSORGeneral Semiconductor
General Semiconductor
P4KA33AAUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSORGeneral Semiconductor
General Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar