|
|
PDF OPA132 Data sheet ( Hoja de datos )
| Número de pieza | OPA132 | |
| Descripción | High Speed FET-INPUT OPERATIONAL AMPLIFIERS | |
| Fabricantes | Burr-Brown | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de OPA132 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
®
OPA132
OPA2132
OPA4132
OPA132
OPA2132
OPA4132
OPA132
OPA2132
OPA4132
High Speed
FET-INPUT OPERATIONAL AMPLIFIERS
FEATURES
q FET INPUT: IB = 50pA max
q WIDE BANDWIDTH: 8MHz
q HIGH SLEW RATE: 20V/µs
q LOW NOISE: 8nV/√Hz (1kHz)
q LOW DISTORTION: 0.00008%
q HIGH OPEN-LOOP GAIN: 130dB (600Ω load)
q WIDE SUPPLY RANGE: ±2.5 to ±18V
q LOW OFFSET VOLTAGE: 500µV max
q SINGLE, DUAL, AND QUAD VERSIONS
OPA132
Offset Trim 1
–In 2
+In 3
V– 4
8 Offset Trim
7 V+
6 Output
5 NC
8-Pin DIP, SO-8
DESCRIPTION
The OPA132 series of FET-input op amps provides
high-speed and excellent dc performance. The combi-
nation of high slew rate and wide bandwidth provide
fast settling time. Single, dual, and quad versions have
identical specifications for maximum design flexibil-
ity. High performance grades are available in the
single and dual versions. All are ideal for general-
purpose, audio, data acquisition and communications
applications, especially where high source impedance
is encountered.
OPA132 op amps are easy to use and free from phase
inversion and overload problems often found in
common FET-input op amps. Input cascode circuitry
provides excellent common-mode rejection and
maintains low input bias current over its wide input
voltage range. OPA132 series op amps are stable in
unity gain and provide excellent dynamic behavior
over a wide range of load conditions, including high
load capacitance. Dual and quad versions feature
completely independent circuitry for lowest crosstalk
and freedom from interaction, even when overdriven
or overloaded.
Single and dual versions are available in 8-pin DIP
and SO-8 surface-mount packages. Quad is
available in 14-pin DIP and SO-14 surface-mount
packages. All are specified for –40°C to +85°C
operation.
OPA2132
Out A 1
–In A 2
+In A 3
V– 4
A
B
8 V+
7 Out B
6 –In B
5 +In B
8-Pin DIP, SO-8
Out A 1
–In A 2
+In A 3
V+ 4
+In B 5
–In B 6
Out B 7
OPA4132
AD
BC
14-Pin DIP
SO-14
14 Out D
13 –In D
12 +In D
11 V–
10 +In C
9 –In C
8 Out C
International Airport Industrial Park • Mailing Address: PO Box 11400 • Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd. • Tucson, AZ 85706
Tel: (520) 746-1111 • Twx: 910-952-1111 • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
© 1995 Burr-Brown Corporation
PDS-1309B
PDS-1309B
Printed in U.S.A. December, 1995
1 page  
TYPICAL PERFORMANCE CURVES (CONT)
At TA = +25°C, VS = ±15V, RL = 2kΩ, unless otherwise noted.
AOL, CMR, PSR vs TEMPERATURE
130
120 Open-Loop
Gain
110
PSR
100
CMR
90
–75 –50 –25
0
25 50 75
Ambient Temperature (°C)
100 125
QUIESCENT CURRENT AND SHORT-CIRCUIT CURRENT
vs TEMPERATURE
4.3 60
4.2 50
4.1
4.0 ±IQ
3.9
±ISC
40
30
20
3.8
–75 –50 –25 0 25 50 75
Ambient Temperature (°C)
10
100 125
OFFSET VOLTAGE
PRODUCTION DISTRIBUTION
12
Typical production
distribution of packaged
10 units. Single, dual and
quad units included.
8
6
4
2
0
Offset Voltage (µV)
0.01
0.001
TOTAL HARMONIC DISTORTION + NOISE
vs FREQUENCY
RL
2kΩ
600Ω
G = +10
0.0001
G = +1
0.00001
10
100
VO = 3.5Vrms
1k
Frequency (Hz)
10k
100k
OFFSET VOLTAGE DRIFT
PRODUCTION DISTRIBUTION
12
Typical production distribution
10 of packaged units. Single,
dual and quad units included.
8
6
4
2
0
Offset Voltage Drift (µV/°C)
MAXIMUM OUTPUT VOLTAGE
vs FREQUENCY
30
Maximum output voltage
VS = ±15V
without slew-rate
induced distortion
20
10
0
10k
VS = ±5V
VS = ±2.5V
100k
1M
Frequency (Hz)
10M
®
5 OPA132, 2132, 4132
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet OPA132.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| OPA130 | Low Power Precision FET-Input Operational Amplifiers (Rev. A) |  Texas Instruments |
| OPA130 | Low Power / Precision FET-INPUT OPERATIONAL AMPLIFIERS | Burr-Brown |
| OPA131 | General Purpose FET-Input Operational Amplifiers (Rev. A) | Texas Instruments |
| OPA131 | General Purpose FET-INPUT OPERATIONAL AMPLIFIERS | Burr-Brown |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |