|
|
Número de pieza | N74F244BN | |
Descripción | Octal buffers 3-State | |
Fabricantes | Philips | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de N74F244BN (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! INTEGRATED CIRCUITS
74F244/74F244B
Octal buffers (3-State)
Product specification
IC15 Data Handbook
Philips Semiconductors
1994 Dec 05
1 page Philips Semiconductors
Octal buffers (3-State)
Product specification
74F244/74F244B
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.)
SYMBOL
PARAMETER
TEST
CONDITIONS1
LIMITS
UNIT
MIN TYP2 MAX
VOH High-level output voltage
VCC = MIN,
VIL = MAX,
VIH = MIN
IOH = -3mA
IOH = -15mA
±10%VCC
±5%VCC
±10%VCC
±5%VCC
2.5
2.7
2.0
2.0
3.4
V
V
V
V
VOL Low-level output voltage
VCC = MIN,
VIL = MAX,
IOL = MAX ±10%VCC
VIH = MIN,
±5%VCC
VIK Input clamp voltage
VCC = MIN, II = IIK
II Input current at maximum input voltage
VCC = MAX, VI = 7.0V
IIH High-level input current
VCC = MAX, VI = 2.7V
74F244 OEa, OEb
0.55 V
0.42 0.55 V
-0.73 -1.2 V
100 µA
20 µA
-1.0 mA
IIL
Low-level input current
74F244 Ian, Ibn
VCC = MAX, VI = 0.5V
74F244B all inputs
-1.6 mA
-40 µA
IOZH
Off-state output current,
high-level voltage applied
VCC = MAX, VO = 2.7V
50 µA
IOZL
Off-state output current,
low-level voltage applied
VCC = MAX, VO = 0.5V
-50 µA
IOS Short-circuit output current3
VCC = MAX
-100
-225 mA
ICCH
40 60 mA
74F244
ICCL VCC = MAX
60 90 mA
ICC Supply current (total)
ICCZ
60 90 mA
ICCH
20 30 mA
74F244B ICCL VCC = MAX
50 70 mA
ICCZ
29 40 mA
NOTES:
1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type.
2. All typical values are at VCC = 5V, Tamb = 25°C.
3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold
techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting
of a high output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any
sequence of parameter tests, IOS tests should be performed last.
1994 Dec 5
5
5 Page Philips Semiconductors
Octal buffers (3-State)
NOTES
Product specification
74F244/74F244B
1994 Dec 05
11
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet N74F244BN.PDF ] |
Número de pieza | Descripción | Fabricantes |
N74F244BD | Octal buffers 3-State | Philips |
N74F244BN | Octal buffers 3-State | Philips |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |