DataSheet.es    


PDF LCX007CN Data sheet ( Hoja de datos )

Número de pieza LCX007CN
Descripción 3.4cm (1.35-inch) Black-and-White LCD Panel
Fabricantes Sony 
Logotipo Sony Logotipo



Hay una vista previa y un enlace de descarga de LCX007CN (archivo pdf) en la parte inferior de esta página.


Total 24 Páginas

No Preview Available ! LCX007CN Hoja de datos, Descripción, Manual

LCX007CN
3.4cm (1.35-inch) Black-and-White LCD Panel
Description
The LCX007CN is a 3.4cm diagonal active matrix
TFT-LCD panel addressed by polycrystalline silicon
super thin film transistors with built-in peripheral
driving circuit. Use of three panels in combination
with the LCX007CL provides a full-color representation.
(The LCX007CN has the visual field angle characteristics
of mirror symmetry to those of the LCX007CL.)
This panel provides a wide aspect ratio of 16:9,
such as those represented in HD. The built-in side-
black function also allows an aspect ratio of 4:3 in
the NTSC/PAL mode.
This panel has a polysilicon TFT high-speed
scanner and built-in function to display images
up/down and/or right/left inverse. The built-in 5V
interface circuit leads to lower voltage of timing
system and control signals.
Features
The number of active dots: 512,880 (1.35-inch; 3.4cm in diagonal)
Horizontal resolution: 600 TV lines
High optical transmittance: 16.5% (typ.)
High contrast ratio with normally white mode: 190 (typ.)
Built-in H and V drivers (built-in input level conversion circuit, 5V driving possible)
NTSC/NTSC-WIDE/HD (band: 20MHz) mode selectable
(PAL/PAL-WIDE mode also available through conversion of scanned dot numbers by an external IC)
Up/down and/or right/left inverse display function
Side-black function
16:9 and 4:3 aspect-ratio switching function
Element Structure
Dots
16:9 display: 1068.5 (H) × 480 (V) = 512,880
4:3 display: 799.5 (H) × 480 (V) = 383,760
Built-in peripheral driver using polycrystalline silicon super thin film transistors.
Applications
Liquid crystal projectors
Super compact liquid crystal monitors
Viewfinders etc.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E95Z05-ST

1 page




LCX007CN pdf
LCX007CN
Input Signals
1. Input signal voltage conditions
(VSS = 0V)
Item Symbol Min. Typ. Max. Unit
H driver input voltage
WID, RGT, HST, HCK1, HCK2
(Low) VHIL
(High) VHIH
–0.5
4.5
0.0
5.0
0.3 V
5.5 V
V driver input voltage
(Low) VVIL
CLR, ENB, VCK, PCG, VST, DWN (High) VVIH
–0.5
4.5
0.0
5.0
0.3 V
5.5 V
Video signal center voltage
Video signal input range1
Common voltage of panel2
VVC
Vsig
Vcom
6.5 7.0 7.2
VVC – 4.5 — VVC + 4.5
VVC – 0.5 VVC – 0.4 VVC – 0.3
V
V
V
1 Video input signal shall be symmetrical to VVC.
2 Common voltage of the panel shall be adjusted to VVC – 0.4V.
Level Conversion Circuit
The LCX007CN has a built-in level conversion circuit in the clock input unit on the panel. The input signal level
increases to HVDD or VVDD. The VCC of external ICs are applicable to 5 ± 0.5V.
–5–

5 Page





LCX007CN arduino
<Electro-optical Characteristics Measurement>
Basic measurement conditions
(1) Driving voltage
HVDD = 15.7V, VVDD = 15.7V
VVC = 7.0V, Vcom = 6.6V
(2) Measurement temperature
25°C unless otherwise specified.
(3) Measurement point
One point in the center of screen unless otherwise specified.
(4) Measurement systems
Two types of measurement system are used as shown below.
(5) Video input signal voltage (Vsig)
Vsig = 7.0 ± VAC [V]
(VAC: signal amplitude)
• Measurement system I
LCX007CN
3.5mm
LCD panel
• Measurement system II
Light receptor lens
Luminance
Meter
Measurement
Equipment
Back light: color temperature 6500 ± 700K (25°C)
Polarizer: POLATECHNO Co., Ltd. THC-13U (Luminance meter side)
Optical fiber
Light Detector
Measurement
Equipment
Drive Circuit
LCD panel
Light
Source
1. Contrast Ratio
Contrast Ratio (CR) is given by the following formula (1).
L (White)
CR =
... (1)
L (Black)
L (White): Surface luminance of the TFT-LCD panel at the input signal amplitude VAC = 0.5V.
L (Black): Surface luminance of the panel at VAC = 4.5V.
Both luminosities are measured by System I.
– 11 –

11 Page







PáginasTotal 24 Páginas
PDF Descargar[ Datasheet LCX007CN.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LCX007CL3.4cm (1.35-inch) Black-and-White LCD PanelSony
Sony
LCX007CN3.4cm (1.35-inch) Black-and-White LCD PanelSony
Sony

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar