|
|
PDF LC9998G Data sheet ( Hoja de datos )
| Número de pieza | LC9998G | |
| Descripción | 1/5 Optical Size PAL Color Solid-State Image Sensor | |
| Fabricantes | Sanyo | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LC9998G (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
Ordering number : EN*5219
Preliminary
CMOS LSI
LC9998G
1/5" Optical Size PAL Color
Solid-State Image Sensor
Overview
The LC9998G is a 1/5" optical size frame transfer type
CCD (charge-coupled device) solid-state image sensor
developed for use in color video cameras.
Features
• Effective number of pixels (total pixels): 499H × 582V
(532H × 600V)
• Number of optical black pixels:
Horizontal direction: Front: 7 pixels
Back: 26 pixels
Vertical direction: Front: 14 pixels
Back: 4 pixels
• Dummy bits: Horizontal direction: 4 pixels
• Horizontal resolution: 220 TV lines
• Supports miniature, compact camera designs.
• Package: 20-pin half-pitch transparent DIP
• Horizontal shift register: 5 V drive
• Supports variable-speed electronic shutter operation
Package Dimensions
unit: mm
3217
[LC9998G]
Device Structure
• 1/5" type frame transfer CCD image sensor
• Unit cell size: 5.8 µm (H) × 3.75 µm (V)
• Chip size: 4.18 mm (H) × 5.10 mm (V)
• Parallel gate CCD sensor
• Built-in high-sensitivity output amplifier
• Cy-G-Ye stripe complementary color filter
Specifications
Absolute Maximum Ratings at Ta = 25°C, VSS = 0 V
Parameter
Maximum supply voltage
Horizontal clock pin
Other clock pins
Other pins
Operating temperature
Storage temperature
Symbol
VDD
VGG
NSUB-PW
VPW = 0 V
VPW = 0 V
NSUB - ø1 to ø4,
øS1 to øS4:
øR
Topr
Tstg
VPW = 0 V
VPW = 0 V
VPW = 0 V
Conditions
Ratings
–0.3 to +18
–0.3 to +5
–0.3 to +50
–0.3 to +55
–0.3 to +18
–15 to +18
–0.3 to +10
–10 to +60
–30 to +80
Unit
V
V
V
V
V
V
V
°C
°C
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
22896HA (OT) No.5219-1/11
1 page  
LC9998G
Bias Conditions
Parameter
Symbol
Conditions
P-well
VPW
Output circuit voltage
VDD
VGG
*1
*2
OG bias
VOG
*2
Note: 1. Design applications so that this level never exceeds the substrate pulse low level VLSUB.
2. These are high-impedance inputs.
DC Characteristics
Parameter
DC operating current
Symbol
IDD
Conditions
DC operating current
min
14.5
1.2
4.5
typ
0
15.0
1.5
5.0
max
15.5
1.8
5.5
Unit
V
V
V
V
min typ max Unit
4.5 7.0 11.0 mA
Note: VP: pulse amplitude
VL: low level
Symbol
ø1
ø2
ø3
ø4
øS1
øS2
øS3
øS4
øS1
øS2
øS3
øS4
øR
øH1
øH2
øNSUB
øNSUB
tWH
typ
167
143
167
143
143
143
143
143
1.4
1.4
62.5
62.5
10
50
50
9.9
4.2
tWL
typ
102
117
102
117
117
117
117
117
62.5
62.5
1.4
1.4
88
50
50
19.99*
19.99*
Figure 3 Pulse Waveform
tr
typ
6.5
11
6.5
11
11
11
11
11
30
30
30
30
4
3
3
0.07
0.07
tf Conditions
typ
6.5
11 During frame drive
6.5 When the frame shift frequency is 3.55 MHz
11
11
11 During frame drive
11 When the frame shift frequency is 3.55 MHz
11
30
30 The values enclosed in dark lines are in µs units and apply
30 during 1H line transfers.
30
4 Reset pulse
3
During horizontal transfers
3
1 The slice pulse values marked * are in ms units.
1 The shutter pulse values marked * are in ms units.
Unit
ns
ns
ns
ns
µs
µs
No.5219-5/11
5 Page 
LC9998G
4. Storage
• Do not allow sunlight or other bright light to fall on CCD sensors for extended periods.
• Since harsh conditions such as high temperatures or high humidities can adversely influence device characteristics,
do not use or store these devices in environments with such conditions. Samples should be stored in places where
the temperature and humidity fall in normal ranges, i.e., 5 to 35°C and 45 to 75% RH.
• Since CCD sensors are precision optical components, they should not be subjected to mechanical shocks.
• Avoid locations with corrosive atmospheres or high dust levels.
• Avoid locations subject to rapid temperature changes.
• Do not place heavy objects on top of boxes containing CCD sensors during storage.
• Use materials that cannot accumulate static charges for containers used to hold samples.
• Do not subject magazines holding CCD sensors to mechanical shocks, since this could adversely influence
reliability during mounting due to pin bending and other problems.
5. Notes on Mounting
• Flare can occur if a lens with an optical size larger than 1/5" is used. Consult your Sanyo sales representative in
advance when selecting lenses.
• This product is mounted in a fully transparent plastic package, and is easily influenced by light that passes through
the mounting board from the back to the front. Design end-products to adequately block out extraneous light.
6. Shipping
• Do not drop or throw packages containing CCD sensors.
• Do not allow packages containing CCD sensors to become wet due to rain or snow.
• Protect packages containing CCD sensors from mechanical shock and vibration as much as possible during
shipping.
s No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace
equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of
which may directly or indirectly cause injury, death or property loss.
s Anyone purchasing any products described or contained herein for an above-mentioned use shall:
Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and
distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all
damages, cost and expenses associated with such use:
Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on
SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees
jointly or severally.
s Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for
volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied
regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of February, 1996. Specifications and information herein are subject to
change without notice.
PS No.5219-11/11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet LC9998G.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LC9998G | 1/5 Optical Size PAL Color Solid-State Image Sensor | Sanyo |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |