DataSheet.es    


PDF LA5005 Data sheet ( Hoja de datos )

Número de pieza LA5005
Descripción Monolithic Linear IC
Fabricantes Sanyo 
Logotipo Sanyo Logotipo



Hay una vista previa y un enlace de descarga de LA5005 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! LA5005 Hoja de datos, Descripción, Manual

Ordering number:ENN1187E
Monolithic Linear IC
LA5000 Series
2 to 5V 60mA
Low Saturation Voltage Regulators
Overview
The LA5002, 5003, 5004, 5005 are voltage regulators hav-
ing a small input-output voltage drop (0.2V typ). They are
especially suited for use in battery-powered low voltage
equipment and commercial or industrial equipment having
a large voltage regulation.
Package Dimensions
unit:mm
3027A-SIP4H
[LA5000Series]
9.5
2.0
2.7
Features
• Small input-output voltage drop (0.2V/IOUT=20mA typ).
• Minimum number of external parts required.
• Highly resistant against load short.
• Radio noise (radiation) control pin.
3.2
1.5
0.8
1.7 1.2 0.8
0.5
0.6
2.4 2.4 2.4
Specifications
Maximum Ratings at Ta = 25˚C
Parameter
Input supply voltage
Output current
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VIN max
IOUT max
Pd max
Ta=80˚C
Topr
Tstg
Conditions
SANYO : SIP4H
Ratings
12
60
560
–20 to +80
–30 to +125
Unit
V
mA
mW
˚C
˚C
Electrical Characteristics at Ta = 25˚C, COUT=10µF, IOUT=20mA, VIN=3V [LA5002], VIN=4V [5003],
VIN=5V [5004], VIN=6V [LA5005]
Parameter
Symbol
Conditions
Ratings
min typ max
Unit
LA5002
1.85
2.0 2.15 V
Output voltage
LA5003
VO LA5004
2.8
3.75
3.0 3.2 V
4.0 4.25 V
LA5005
4.75
5.0 5.25 V
Line regulation
Load regulation
VOline
VOload
LA5002 : 2.5V<VIN<8V
LA5003 : 3.5V<VIN<9V
LA5004 : 4.5V<VIN<10V
LA5005 : 5.5V<VIN<11V
1mA<IOUT<40mA
1mA<IOUT<50mA
50 mV
50 mV
50 mV
50 mV
20 mV
25 mV
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
33100TN (KT)/N069YT, TS No.1187–1/5

1 page




LA5005 pdf
LA5000Series
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of April, 2000. Specifications and information herein are subject to
change without notice.
PS No.1187–5/5

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet LA5005.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LA5000Monolithic Linear ICSanyo
Sanyo
LA5002Monolithic Linear ICSanyo
Sanyo
LA5003Monolithic Linear ICSanyo
Sanyo
LA5004Monolithic Linear ICSanyo
Sanyo

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar