DataSheet.es    


PDF CD54ACT1633A Data sheet ( Hoja de datos )

Número de pieza CD54ACT1633A
Descripción Synchronous Presettable Binary Counters
Fabricantes Intersil 
Logotipo Intersil Logotipo



Hay una vista previa y un enlace de descarga de CD54ACT1633A (archivo pdf) en la parte inferior de esta página.


Total 1 Páginas

No Preview Available ! CD54ACT1633A Hoja de datos, Descripción, Manual

CD54AC163/3A
SEMICONDUCTOR
CD54ACT163/3A
COMPLETE DATA SHEET
June 1997
COMING SOON!
Synchronous Presettable Binary Counters
Description
The CD54AC163/3A and CD54ACT163/3A are synchronous
presettable binary counters that utilize the Harris Advanced
CMOS Logic technology. The CD54AC163/3A and
CD54ACT163/3A are reset synchronously with the clock.
Counting and parallel presetting are both accomplished syn-
chronously with the negative-to-positive transition of the
clock.
A LOW level on the Synchronous Parallel Enable input, SPE,
disables the counting operation and allows data at the P0 to
P3 inputs to be loaded into the counter (provided that the
setup and hold requirements for SPE are met).
The counters are reset with a LOW level on the Master
Reset input, MR. The requirements for setup and hold time
with respect to the clock must be met.
Two count enables, PE and TE, in each counter are provided
for n-bit cascading. Reset action occurs regardless of the
level of the SPE, PE and TE inputs.
The look-ahead carry feature simplifies serial cascading of
the counters. Both count enable inputs (PE and TE) must be
HIGH to count. The TE input is gated with the Q outputs of
all four stages so that at the maximum count, the terminal
count (TC) output goes HIGH for one clock period. This TC
pulse is used to enable the next cascaded stage.
The CD54AC163/3A and CD54ACT163/3A are supplied in
16 lead dual-in-line ceramic packages (F suffix).
Functional Diagram
P0 P1 P2 P3
3456
SPE 9
CP 2
MR 1
PE 7
TE 10
14 Q0
13 Q1
12 Q2
11 Q3
15 TC
GND = 8
VCC = 16
ACT INPUT LOAD TABLE
INPUT
UNIT LOAD (NOTE 1)
Pn 0.13
CP 1
MR, TE
0.83
SPE
0.67
PE 0.5
NOTE:
1. Unit load is ICC limit specified in DC Electrical Specifications
Table, e.g., 2.4mA Max at +25oC.
Absolute Maximum Ratings
DC Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +6V
DC Input Diode Current, IIK
For VI < -0.5V or VI > VCC + 0.5V . . . . . . . . . . . . . . . . . . . . . .±20mA
DC Output Diode Current, IOK
For VO < -0.5V or VO > VCC + 0.5V . . . . . . . . . . . . . . . . . . . . .±50mA
DC Output Source or Sink Current, Per Output Pin, IO
For VO > -0.5V or VO < VCC + 0.5V . . . . . . . . . . . . . . . . . . . . .±50mA
DC VCC or GND Current, ICC or IGND
For Up to 4 Outputs Per Device, Add ±25mA For Each
Additional Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±100mA
Power Dissipation Per Package, PD
TA = -55oC to +100oC (Package F) . . . . . . . . . . . . . . . . . . 500mW
TA = +100oC to +125oC (Package F) . . . . . . . . Derate Linearly at
8mW/oC to 300mW
Operating Temperature Range, TA
Package Type F . . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to +125oC
Storage Temperature, TSTG . . . . . . . . . . . . . . . . . . -65oC to +150oC
Lead Temperature (During Soldering)
At Distance 1/16in. ± 1/32in. (1.59mm ± 0.79mm)
From Case For 10s Max . . . . . . . . . . . . . . . . . . . . . . . . . . +265oC
Unit Inserted Into a PC Board (Min Thickness 1/16in., 1.59mm)
With Solder Contacting Lead Tips Only. . . . . . . . . . . . . . . +300oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Recommended Operating Conditions
Supply Voltage Range, VCC
Unless Otherwise Specified, All Voltages Referenced to GND
TA = Full Package Temperature Range
CD54AC Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5V to 5.5V
CD54ACT Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5V to 5.5V
DC Input or Output Voltage, VI, VO. . . . . . . . . . . . . . . . . . 0V to VCC
Operating Temperature, TA . . . . . . . . . . . . . . . . . . . -55oC to +125oC
Input Rise and Fall Slew Rate, dt/dv
at 1.5V to 3V (AC Types) . . . . . . . . . . . . . . . . . . . 0ns/V to 50ns/V
at 3.6V to 5.5V (AC Types) . . . . . . . . . . . . . . . . . 0ns/V to 20ns/V
at 4.5V to 5.5V (AC Types) . . . . . . . . . . . . . . . . . 0ns/V to 10ns/V
CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper I.C. Handling Procedures.
Copyright © Harris Corporation 1994
1
File Number 3893

1 page





PáginasTotal 1 Páginas
PDF Descargar[ Datasheet CD54ACT1633A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
CD54ACT1633ASynchronous Presettable Binary CountersIntersil Corporation
Intersil Corporation
CD54ACT1633ASynchronous Presettable Binary CountersIntersil
Intersil

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar