|
|
Número de pieza | TDA7052 | |
Descripción | 1 W BTL mono audio amplifier | |
Fabricantes | NXP Semiconductors | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TDA7052 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! INTEGRATED CIRCUITS
DATA SHEET
TDA7052
1 W BTL mono audio amplifier
Product specification
File under Integrated Circuits, IC01
July 1994
1 page Philips Semiconductors
1 W BTL mono audio amplifier
Product specification
TDA7052
CHARACTERISTICS
VP = 6 V; RL = 8 Ω; f = 1 kHz; Tamb = 25 °C; unless otherwise specified.
SYMBOL
PARAMETER
CONDITIONS MIN.
TYP.
MAX. UNIT
Supply
VP
Itot
Gv
Po
Vno(rms)
Vno(rms)
fr
SVRR
∆V5-8
THD
ZI
Ibias
Supply voltage range
Total quiscent current
Voltage gain
Output power
Noise output voltage
(RMS value)
Frequency response
Supply voltage ripple rejection
DC output offset voltage
pin 5 to 8
Total harmonic distortion
Input impedance
Input bias current
RL = ∞
THD = 10%
3
−
38
−
6
4
39
1,2
18 V
8 mA
40 dB
−W
note 1
note 2
−
−
−
note 3
40
RS = 5 k Ω
PO = 0,1 W
−
−
−
−
150
60
20 Hz to
20 kHz
50
−
0,2
100
100
300
−
−
−
100
1,0
−
300
µV
µV
Hz
dB
mV
%
kΩ
nA
Notes to the characteristics
1. The unweighted RMS noise output voltage is measured at a bandwidth of 60 Hz to 15 kHz with a source impedance
(RS) of 5 kΩ.
2. The RMS noise output voltage is measured at a bandwidth of 5 kHz with a source impedance of 0 Ω and a frequency
of 500 kHz. With a practical load (R = 8 Ω; L = 200 µH) the noise output current is only 100 nA.
3. Ripple rejection is measured at the output with a source impedance of 0 Ω and a frequency between 100 Hz and
10 kHz. The ripple voltage = 200 mV (RMS value) is applied to the positive supply rail.
July 1994
5
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet TDA7052.PDF ] |
Número de pieza | Descripción | Fabricantes |
TDA7050 | Low voltage mono/stereo power amplifier | NXP Semiconductors |
TDA7050T | Low voltage mono/stereo power amplifier | NXP Semiconductors |
TDA7052 | 1 W BTL mono audio amplifier | NXP Semiconductors |
TDA7052A | 1 W BTL mono audio amplifier with DC volume control | NXP Semiconductors |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |