DataSheet.es    


PDF TDA1023T Data sheet ( Hoja de datos )

Número de pieza TDA1023T
Descripción Proportional-control triac triggering circuit
Fabricantes NXP Semiconductors 
Logotipo NXP Semiconductors Logotipo



Hay una vista previa y un enlace de descarga de TDA1023T (archivo pdf) en la parte inferior de esta página.


Total 19 Páginas

No Preview Available ! TDA1023T Hoja de datos, Descripción, Manual

INTEGRATED CIRCUITS
DATA SHEET
TDA1023/T
Proportional-control triac triggering
circuit
Product specification
Supersedes data of August 1982
File under Integrated Circuits, IC02
May 1991

1 page




TDA1023T pdf
Philips Semiconductors
Proportional-control triac triggering circuit
Product specification
TDA1023/T
Trigger pulse width control input PW (pin 10)
The width of the trigger pulse may be adjusted to the value
required for the triac by choosing the value of the external
synchronization resistor RS between the trigger pulse
width control input PW (pin 10) and the AC mains.
The pulse width is inversely proportional to the input
current (see Fig.13).
Output Q (pin 3)
Since the circuit has an open-emitter output it is capable of
sourcing current. It is thus suited for generating
positive-going trigger pulses. The output is current-limited
and short-circuit protected. The maximum output current is
150 mA and the output pulses are stabilized at 10 V for
output currents up to that value.
To minimize the total supply current and power dissipation,
a gate resistor RG must be connected between the output
Q and the triac gate to limit the output current to the
minimum required by the triac (see Figs 5 to 8).
Pull-down resistor Rpd (pin 1)
The TDA1023 includes a 1.75 kpull-down resistor Rpd
between pins 1 and 13 (VEE, ground connection) intended
for use with sensitive triacs.
LIMITING VALUES
In accordance with the Absolute Maximum System (IEC 134)
SYMBOL
PARAMETER
VCC DC supply voltage
Supply current
I16(AV)
I16(RM)
I16(SM)
VI
I6, 7, 9, 10
V1
V3, 8, 11
average
repetitive peak
non-repetitive peak (tp < 50 µs)
input voltage, all inputs
input current
voltage on Rpd connection
output voltage, Q, QR, VZ
Output current
-IOH(AV)
-IOH(M)
Ptot
Tstg
Tamb
average
peak max. 300 µs
total power dissipation
storage temperature range
operating ambient temperature range
MIN.
55
20
MAX.
16
30
100
2
16
10
16
16
30
700
500
+150
+75
UNIT
V
mA
mA
A
V
mA
V
V
mA
mA
mW
°C
°C
May 1991
5

5 Page





TDA1023T arduino
Philips Semiconductors
Proportional-control triac triggering circuit
Product specification
TDA1023/T
Fig.9 VS = 110 V.
Fig.10 VS = 220 V.
May 1991
11

11 Page







PáginasTotal 19 Páginas
PDF Descargar[ Datasheet TDA1023T.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TDA1023Proportional-control triac triggering circuitPhilips
Philips
TDA1023Proportional-control triac triggering circuitNXP Semiconductors
NXP Semiconductors
TDA1023TProportional-control triac triggering circuitNXP Semiconductors
NXP Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar