DataSheet.es    


PDF TD-23 Data sheet ( Hoja de datos )

Número de pieza TD-23
Descripción MICROWAVE NOISE TUBES & NOISE SOURCES
Fabricantes Clare 
Logotipo Clare Logotipo



Hay una vista previa y un enlace de descarga de TD-23 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! TD-23 Hoja de datos, Descripción, Manual

MICROWAVE NOISE TUBES & NOISE SOURCES
TD/TN Series
DESCRIPTION
CP Clare’s TD Series of gas discharge microwave noise tubes and TN Series of gas discharge microwave noise
sources are the element in a microwave RF system that allows accurate measurements of the noise figure of the
receiver or its components. The requirements of a device used for making such noise figure measurements
include broad bandwidth inherent in the active element, stability, ease of operation, and long life. In general, the
range of usefulness of these noise sources permits measurements of noise figures from about 2 to 30dB. The
PS-237 through PS-240 current-regulated power supplies can be used to operate many of the noise sources
described herein.
FEATURES
s Excess noise ratios (ENR): up to 20dB
s Broad bandwidth
s Excellent long term stability
s Life up to 20,000 hours
s AC, DC, or pulsed operation
APPLICATIONS
s Noise figure measurement
SPECIFICATION RANGES
Parameter
Range
Units
Frequency
0.2 - 220.0
GHz
ENR
8.8 - 20.1
dB
Operating Current
30 - 250
mA
Starting Voltage
0.9 - 7.0
kV
(See detailed specifications for more data. Contact CP Clare for TD and TN part numbers or for other
requirements not listed.)
www.cpclare.com
571

1 page




TD-23 pdf
MICROWAVE NOISE TUBES & NOISE SOURCES
TD/TN Series
TD SERIES GAS DISCHARGE NOISE SOURCE TUBES
with Filamentary Cathode Noise Tubes(5)
All characteristics at 25˚C
WAVE-GUIDE PART
FREQUENCY APPROX. TUBE DC ANODE MINIMUM
NUMBER
RANGE
ENR DROP CURRENT STARTING
(GHz)
(dB)
(VDC)
(mA) VOLTAGE
SPIKE (kV)
WR-42
TN-170
18.0-26.5
15.0 170
120
2.0
WR-28
WR-22
TN-162
TN-172
26.5-40.0
33.0-50.0
15.4 170
15.4 170
120
120
2.0
2.0
WR-19
TN-163
40.0-60.0
15.4 170
120
2.0
WR-15
TN-164
50.0-75.0
15.0 170
120
2.0
WR-12
TN-171
60.0-90.0
15.0 210
100
2.5
WR-10
WR-8
TN-165
TN-167
75.0-110.0
90.0-140.0
14.2 225
13.0 225
75
75
3.0
3.0
WR-6
TN-166A
110.0-170.0
13.0 225
50
3.0
WR-5
TN-173
140.0-220.0
9.0 225
50
3.0
(5) CP Clare can usually refurbish noise sources (depending on condition of waveguide) and install replacement tubes.
REPLACEMENT
TUBE
TD-170
TD-162
TD-172
TD-163
TD-164
TD-171
TD-165
TD-167
TD-166A
TD-173
MOUNTING
MATE
7°E
7°E
7°E
7°E
7°E
7°E
7°E
7°E
7°E
7°E
FLANGE
UG-595/U
UG-599/U
UG-599/U
UG-385/U
UG-385/U
UG-385/U
UG-385/U
UG-385/U
UG-385/U
UG-385/U
NOISE SOURCE POWER SUPPLIES
with Current Regulation
PART NUMBER
FOR NOISE TUBES(6)
AC INPUT
DC STARTING
VOLTAGE (kV)
DC OPERATING
CURRENT (mA)
PS-237
PS-238
PS-239
PS-240
TN-162 thru TN-172
except TN-166A
TN-173, TN-166A
115VAC, 60Hz
220VAC, 50Hz
115VAC, 60Hz
220VAC, 50Hz
5.0
5.0
5.0
5.0
(6)These power supplies, though designed for the TN-162 through TN-173, are capable of operating many other noise sources made by CP Clare.
150
150
120
75
ORDERING INFORMATION
A complete part number is represented by
the information in the Part Number column
of the specification table.
www.cpclare.com
575

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet TD-23.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TD-21MICROWAVE NOISE TUBES & NOISE SOURCESClare
Clare
TD-22MICROWAVE NOISE TUBES & NOISE SOURCESClare
Clare
TD-23MICROWAVE NOISE TUBES & NOISE SOURCESClare
Clare
TD-24MICROWAVE NOISE TUBES & NOISE SOURCESClare
Clare

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar