DataSheet.es    


PDF TC9028F Data sheet ( Hoja de datos )

Número de pieza TC9028F
Descripción INFRARED REMOTE CONTROL TRANSMITTING CMOS LSI WITH MICROCONTROLLING
Fabricantes Toshiba 
Logotipo Toshiba Logotipo



Hay una vista previa y un enlace de descarga de TC9028F (archivo pdf) en la parte inferior de esta página.


Total 21 Páginas

No Preview Available ! TC9028F Hoja de datos, Descripción, Manual

TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC9028P,TC9028F
TC9028P/F
Infrared Remote Control Transmitting CMOS LSI with Microcontrolling
TC9028P, TC9028F is CMOS LSI for Infrared Remote Control
Transmitting suitable for Remote Controlling TV, VCR, Video
Disk, CD-Player etc.
Using a 4 bit Microcontroller, various transmittings are
structured by a programming.
Features
· Low voltage operation: 2.0~4.0 V
· Low power dissipation: ≤ 1 µA (at Hold Function)
· Program memory (ROM) capacity: 768 × 8 bit
· Data memory (RAM) capacity: 16 × 4 bit
· Instruction: 44 kinds
· Timer/Counter: 10~15 bit
· I/O port (15 pins)
I/O: 2 ports 8 pins
Input: 1 port 4 pins
Output: 1 port 3 pins
(Including High Current Output)
· Subcarrier frequency: fosc/12, fosc/8
fosc/24, fosc/16 (Option)
· Oscillating frequency: 400~800 kHz
· Instruction execution time: 11 µs (at 455 kHz)
· Package: DIP20 [TC9028P]
SOP20 [TC9028F]
TC9028P
TC9028F
Weight
DIP20-P-300-2.54A : 1.4 g (typ.)
SOP20-P-300-1.27 : 0.48 g (typ.)
Pin Connection (top view)
1 2002-01-08

1 page




TC9028F pdf
TC9028P/F
2.2 Memory bank register (MBR)
The memory bank register is a 4 bit write-only register. It holds the page specification (upper 4 bits of
the program counter) when a branch is made anywhere in program memory.
2.3 Stack register (STACK)
The stack is a 10 bit register. When the [CALLS a] instruction is executed, the stack register saves
the contents of the program counter (return address) before the program jumps to the processing
routine.
Only one level of subroutines can be used. When there are two calls, the first return address is
overwritten when the second return address is saved to the stack register.
When the program returns from the processing routine, execution of the [RET] instruction restores
the contents of the stack register to the program counter.
2.4 Data counter (DC)
When fixed data stored in the data table in program memory (ROM) are read, the data counter (DC)
are used to specify 4 bits of the address.
In addition to transferring data to the accumulator, the data counter is also equipped with increment
and decrement functions and can therefore be used as a general-purpose register.
Fixed data stored in the data table can be read using the table look-up instruction.
When the table look-up instruction is executed, the upper 6 bits of the ROM address are “101111” and
the lower 4 bits are the contents of the data counter (DC). These bits specify the last 16 bytes
(addresses 2F0~2FFH) of program memory for fixed data.
2.5 Program memory (ROM)
Program memory stores program and fixed data. The next instruction to be executed is read from the
address indicated by the program counter.
Physical program memory doesn’t exist in addresses 300~3FFH.
When this area is read on the program, 7FH ( [NOP] instruction) is read.
Figure 2.2 Program memory map
5 2002-01-08

5 Page





TC9028F arduino
3.2.1
Timer register (TR)
The timer register is a 4 bit write-only register.
It selects the mode when the timer status is read.
The timer register is initialized to 0 at reset.
TC9028P/F
Figure 3.4 Timer/counter output mode control using timer register
11 2002-01-08

11 Page







PáginasTotal 21 Páginas
PDF Descargar[ Datasheet TC9028F.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TC9028AFINFRARED REMOTE CONTROL TRANSMITTING CMOS LSI WITH MICROCONTROLLINGToshiba
Toshiba
TC9028APINFRARED REMOTE CONTROL TRANSMITTING CMOS LSI WITH MICROCONTROLLINGToshiba
Toshiba
TC9028FINFRARED REMOTE CONTROL TRANSMITTING CMOS LSI WITH MICROCONTROLLINGToshiba
Toshiba
TC9028PINFRARED REMOTE CONTROL TRANSMITTING CMOS LSI WITH MICROCONTROLLINGToshiba
Toshiba

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar